You can now pre-order on Amazon
Type: Posts; User: Dontilgon
You can now pre-order on Amazon
Damn didn’t think of that one THANKS!!!
Just getting around to installing but can’t find a pic of which way the float goes on.Its not in the instructions that was provided . Thanks
I have a new 02 sensor, I will change and then start up cold. I will record the cold start up. After that I will go in the manual to look at the procedure. Also I’m sorry it was the pressure sending...
14.9 at the battery but It obviously fluctuates with the idle.Interesting thing I started it this morning and it idled perfectly for a good minute or two,opened up the engine bay and noticed the cold...
Okay I will check voltage and report back. Sad was looking forward to taking it out tonight thinking with all the “upgrades” I would feel more confident driving it. Anyways prior to these...
I did not have this issue prior to the swap. The previous alternator was oem and still working.i believe the belts are tighten properly being I put the stainless alternator adjuster on. If anything I...
Just installed there alternator,when all
Was said and done I now have this problem. I cant think of anything I did wrong that would case this issue https://youtu.be/_OWN-zleySwm.
Going to take it out of the can of carb cleaner today. If that didn't work , I'll try the vinegar with water. I'll post results here
Soaking as we speak thanks !
I’ll give it a shot thanks
So I was looking to rebuild my motorcycle carburetors all was going well.instead of taking the traditional route and using a degreaser can and letting them sit in there I opted for a sonic cleaner...
+1 Delorean Industries customer service is second to none and its clear that the detail of there products are meticulous. I mean just the brackets that hold the overflow tank are impressive.
Got it thanks!
No distortion, old ones were perfect. If look closely the tabs don’t line up
Did any of you guys have a fitment problem.Unless I’m doing something wrong.im hesitate to leave it like this
There is a bit of maneuvering but pretty straight forward. I used a plastic flathead to help get peel it away from the car. It was the original antenna so its been on there awhile. Waiting to hear...
Does it matter if I use a glass tube or spade type for the inline antenna fuse . Also what would the proper amp?
Thanks again , any reason PO disconnected ?
Okay, got it BAT is brown/orange. I was just following the instructions provided. So in the process of changing the antenna I noticed this disconnected. There’s no way this just came loose. The...
Forgot to mention it’s the 40 amp relay for the black/orange and orange/brown wire I’m stuck at
I crimped new terminals on the burnt wires above. I don’t remember which side of the breaker these two wires came out of either battery or AUX side. I did the 12 V test has in the instructions but...
Interesting so you put boxed LCA and added the brackets
Nope bone stock. Its ironic that the marks are in the same spot on both sides. I heard of flexing LCA but no clue on how or where it flex. However, I believe they should be changed out anyways,...
Tuff to show in a picture but in person it clearly looks like the LCA made contact with the frame on both passenger and driver side.