FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: WHO1DMC

Page 1 of 14 1 2 3 4

Search: Search took 0.03 seconds; generated 47 minute(s) ago.

  1. [Engine] My thoughts on the belt. 1. The pulleys are off...

    My thoughts on the belt. 1. The pulleys are off ever so slightly. 2. The type of belt you're using is expanding do to the speed. As you know our engines don't have a automatic tensioner to take up...
  2. I'm glad that Zach had a great time with all of...

    I'm glad that Zach had a great time with all of us and dismis his belief that we are just there for BTTF. I think he was surprised, that we really do have a profound love and respect for his dad and...
  3. [Heat & A/C] There are slightly better compressors but is it...

    There are slightly better compressors but is it worth it.
    If you're A/C is blowing cold I would leave it alone! Putting the best compressor in also needs all the other components replaced as well....
  4. [General] There not that big of a deal to remove. 1. Take...

    There not that big of a deal to remove.
    1. Take out the back bulkhead board.
    2. Remove all the screws.
    3. The top support for seatbelt.
    4. Remove that section of inner door seal.
    5. Use heat...
  5. Replies
    29
    Views
    1,273

    [General] You can take it for what it is worth. When...

    You can take it for what it is worth. When Stephen Wynne was at the DCS B. Bash he was saying that he thinks in 10 years we could be seeing Deloreans going for a 100k. I was thinking a big wow but we...
  6. Replies
    8,799
    Views
    1,919,788

    [General] Took the car out for a test drive. So I have a...

    Took the car out for a test drive. So I have a fully functional clutch again!!! I'm so happy!!!



    Dave B.
  7. Replies
    8,799
    Views
    1,919,788

    [General] Replaced the original clutch slave today....

    Replaced the original clutch slave today. Tomorrow I will see if I have clutch.
    Man what a pain in the neck!

    Don't they just look wonderful!😁😁

    Dave B.
  8. Replies
    8,799
    Views
    1,919,788

    [General] Lost clutch hydraulics so it's time for the...

    Lost clutch hydraulics so it's time for the replacements. So this is a 40 year old clutch master cylinder. The slave will be coming soon.




    Dave B.
  9. Replies
    5
    Views
    319

    [General] Ya I agree it doesn't look 80s at all. The...

    Ya I agree it doesn't look 80s at all. The electric part is definitely not 80s and I don't think they made any signs that size.
  10. Replies
    5
    Views
    372

    [General] Well they must have missed some. I know I wasn't...

    Well they must have missed some. I know I wasn't that lucky.




    Dave B.
  11. Replies
    5
    Views
    372

    [General] They do exist!!!

    Jeff from the POGs crew was letting some of his collection go at the DCS 40th Birthday Bash. These are one of the infamous tool kits that we were all supposed to get with the cars. They were told to...
  12. Replies
    1
    Views
    297

    [General] It's because of things like this that I did a...

    It's because of things like this that I did a complete teardown and rebuild last year. I didn't have a boot failure I wanted to prevent one. If it has the original grease your in for some fun because...
  13. [General] +1 on that!

    +1 on that!
  14. Replies
    8,799
    Views
    1,919,788

    [General] Finished ground upgrades. I ran a ground from the...

    Finished ground upgrades. I ran a ground from the front to the trailing arm bracket. From bracket to transmission other side of transmission to the battery trailing arm bracket. New battery cable....
  15. Replies
    8,799
    Views
    1,919,788

    [General] I went with the rubber ones for peace of mind....

    I went with the rubber ones for peace of mind. Are poly trailing arm bushings worth the price? I didn't want to take the chance.



    David B.
  16. Replies
    8,799
    Views
    1,919,788

    [General] Replaced the original TABs, bushings and started...

    Replaced the original TABs, bushings and started a ground upgrade. The TABs you can barely tell that there bent. OK there's only a little over 16000 miles on the OD.

    For the gounds I replaced the...
  17. [Heat & A/C] The first thing I would check because it's easy...

    The first thing I would check because it's easy is the hot water valve. The vacuum line can get weak and fall off or not hold proper vacuum to shut the valve or the valve could be bad. It's on the...
  18. Replies
    6
    Views
    262

    [General] My bolts aren't that bad definitely reusable....

    My bolts aren't that bad definitely reusable. There is some rust on them but there off so I'm going to replace them.


    Dave B.
  19. Replies
    6
    Views
    262

    [General] Yes the M8s. Ok I can understand that. I will...

    Yes the M8s.
    Ok I can understand that.
    I will use a lock nut.
    The TABs I have do have nyloc nuts and I do know that some people have put lock nuts on those.


    Thanks
    Dave B.
  20. Replies
    6
    Views
    262

    [General] Well the reason I'm asking is that I'm replacing...

    Well the reason I'm asking is that I'm replacing the TABs and everything is out. I noticed that for the bushing one bolt has a lock washer and the other a lock nut. So can't you just use a lock...
  21. Replies
    6
    Views
    262

    [General] TAB bushing bolt lock nut aka jam nut.

    A question for you guys. How many people have not put the lock nut back in? Can you just use a lock washer?




    Thanks
    Dave B.
  22. [Engine] Just pressing on the air plate is going to flood...

    Just pressing on the air plate is going to flood and stall the engine. Because the butterflies aren't being opened to allow more air to enter the engine.



    Dave B.
  23. Replies
    11
    Views
    491

    [Heat & A/C] Possible air flow problem. How clean and open are...

    Possible air flow problem. How clean and open are the fins on condenser and radiator?


    Dave B.
  24. Replies
    8,799
    Views
    1,919,788

    [General] With David McKeens idle ECU there is a wire you...

    With David McKeens idle ECU there is a wire you can connect to the compressor wire to bump the idle up a 100 RPM for the car's that may not be able to handle the A/C on at idle. It's only active with...
  25. Replies
    153
    Views
    30,685

    I also did mine in a very similar manner early...

    I also did mine in a very similar manner early this year. It's just plate steal welded on the bottom leaving it open from end to end. I don't think much water would be able to collect do to just...
Results 1 to 25 of 328
Page 1 of 14 1 2 3 4