Search:

And that thread's LINK

Good update on the symptoms.

That's an interesting photo. It looks like your seal has a massively-bent U-channel in it at the top of the A-pillar. What I call the U-channel is made up of the...

Another thing to check. If you pull up the inner sear along the A-pillar take a look along the gutter between the windshield frame and the seal flange to see if there's dirt, mud or debris jammed in...

On ours with the 2018 DMCH inner door seals and even with prior seal designs there was always enough x-section open area at and beneath the seal body to drain the roof water. Take a look up from the...

Refer to the DeLorean Workshop Manual.

N:01:01 to N:01:09 explains how all the flaps/doors are meant to work in response the the climate control settings, specifically the mode switch and the...

See Photo #1 in Post #10 of this thread. It shows the Raised White Letter side of the rear tires - just before I painted them black.

You can also see the RWL side of the rears at the 1m20s point...

A. Yes, several tire models come in 235/60-15 size. That's not the problem. The problem is that for the past 7-8 years none of those tire models were available in 195/60-14 size for the fronts....

The following fact may have something to do with the rears being in short supply just now:

The rears are made only in Indonesia. So if recent 235/60-15 factory shipments are sold out it may take a...

Here's a bonus post about blacking out the raised white letters on the Hankook Kinergy ST rears. The first photo shows the unpatterned RWL sidewall. Mounting that side inboard means the RWLs are hard...

And another attempt at the photos:

Re-posting the Kinergy ST tire review - this time with photos linked in, I hope.

Hankook recently released a new line of tires in North America and perhaps elsewhere. As many owners now know,...

Hankook recently released a new line of tires in North America and perhaps elsewhere. As many owners now know, Hankook Kinergy ST H735 tires are available in both 195/60-14 and 235/60-15 sizes, the...

Yes, it's probably the Bendix drive keeping the pinion gear on the flywheel ring after the engine fires instead of retracting it. There can be a few reasons for that, not all of which call for...

There’s this D owner in Anchorage.

http://dmctalk.org/showthread.php?11420-Calling-all-Alaska-Delorean-owners&highlight=Alaska

This owner’s active in this forum and may know of other AK owners.

It's a fairly common problem.

In addition to the other suggestions you may get some improvement in clearance by taking care to relocate the bulb of the seal away from the door frame in that...

Thanks for the good comments.

In re-reading the end of John Lamm's Stainless Steel Illusion just now I see that Consolidated did have control of the inventory and the cars in DMC's Dunmurry...

You were right but the gentleman you met probably wasn't completely wrong. He was likely just suffering from poor memory about the location.

A number of DeLoreans were assembled/finished in...

Workshop Manual Sec M:09:01-02 covers motor removal and installation. There's a diagram there, too.

Among other things it calls for removing some of the flexible and rigid ductwork, clamps and, of...

Our new owner Tadeusz also asks for technical manuals. "2. Can I have a kind ask to point me to any workshop manual or forum guide (couldn’t find one) ?"

3 related manual/technical DMCTalk links...

Interesting problems you ask about.

Here is where you can see the diagram of the rear louver with the louver panel grilles.
...

These aren't exactly DeLorean comments. They're just weird "DeLorean" items currently for sale on eBay.

Need any matching grout for the frame or the fascias?

How about a new power steering...

Do you say this because you know the pass. door strut is new and the driver door strut isn't? Or do you say it because the pass. door stays up and the driver door sags?



a. Try Christian's...

Thanks for sharing this sad news, Rich.

While I never had the pleasure of meeting John I agree he was a great automotive author. For those who aren't aware of him John Lamm was a long-time...

Interesting experiment, Dave. I'm volunteering. Results here:

Returned from a drive an hour ago. Restarted it just now, then ran your test immed. after shutdown beginning with mode switch at...

Is it the Craig radio? Your problem is with AM or FM or both?

For best FM with Craig: Toggle the DX (distant station) switch on and off a few times. Leave it in ON mode (red light on).

In...