I have tried the reproductions available but they are nowhere near the original one...
Type: Posts; User: BABIS
I have tried the reproductions available but they are nowhere near the original one...
Hello guys, I am looking for one original crossgate cable bracket 108597.
Thanks!
I eventually found them, thanks!
it connects to wiper motor wirings!
Hello guys, I am looking for a set of original idler brackets, pn 100772 and 100773.
Thanks!
I can confirm this!
thanks! I have found that you can get the stock length with the adjuster "all closed", which makes sense since there is no need to shorten the arm (it would mean taller suspension)
Hello guys
Can you give me the stock length of the rear upper arms (eyelet center to eyelet center)?
I am installing adjustable arms and I am looking for a basic setting.
Thanks
I have recently installed the orifice tube in a new repro evaporator, and I found the orifice tube is free to slide about 3/4" beyond the the pipe opening before stopping. with the old evaporator,...
found one, thread can be closed.
found one, thread can be closed.
Hello
I am searching for one "vacuum delay valve" #102410 in good working condition
65583
Thanks
Hello
I am searching for one passenger side mirror back plate like this one:
65564
it is the later style with the "sorrounding frame"
Thanks
IIRC the correct tap is 1/2" UNF (maybe you have a tap which isn't UNF)
this would be a clever feature. do you have more infos about the mod?
Hello Dave,
can you add instructions about adding the two ground inputs from remote module?
do you think your board will fit inside the stock dlm housing?
Thanks
Hello guys
can you tell me the length of the three M7 bolts used to assemble the oil pickup inside the pan?
the bolts are PN 103706 here:...
it looks like that side markers and front lights won't be cohordinated when used as blinkers?
I wired 2 of these to get both lights cohordinated:...
is an option for you to buy covers for both sides ?
bump!
thanks guys. one vendor told me to install fatter orings to ensure the seal.
I have brand new injectors and the original orings fit quite right, but they aren't hard to install or remove at all
Is anyone selling an aluminium coolant tank?
Thanks
for those who are using the EV12 injectors: have you had to change the lower o-ring to a bigger diameter one?
you can also have the upper surface of the block skimmed to the right height for your liners and shims
from your experience, what is best with stock calipers and vented rotors?