That's right. NO HOLES IN THE FENDERs. The first set of photos at the beginning of my thread shows how I used clips for the cable around the fenders. I never drilled any holes any where. I was...
Type: Posts; User: Hissem
That's right. NO HOLES IN THE FENDERs. The first set of photos at the beginning of my thread shows how I used clips for the cable around the fenders. I never drilled any holes any where. I was...
I decided to upgrade the cable that goes from the front Flux Band that wraps around the wheel fender and under the body, then back up to the engine bay. I originally used a 1/2in. OD vinyl hose and...
I did not make any changes to the engine and cams. I just made the air intake manifold and tuned the carb to run and idle properly with great results. The design of the air intake may be very...
The electric fuel pump I used was from O'Reilly & the part number is E16010. It is a basic universal fuel pump. It is mounted outside the boot with a 90 degree gradual bend pipe that will allow the...
Thanks, I know I might forget to mention some details. I did think about using a mechanical fuel pump, and I still might do that. I wanted to start with the electric to get the car running first....
The Hissem time machine is now carbureted. It was a slow and studied out decision. The time was right when I had to do a head gasket change and ended up taking the engine out and doing an engine...
This was well written from at the spur of the moment interview. I would like to clear up some minor facts that are mentioned. The title says it is a "perfect replica". That is misleading. I never did...
I started out using white LED Christmas lights for the FC. After a year I have updated the FC with ice cycle Christmas lights tubes. They are much better than the ones I started with. I know the...
I do have some areas of skill to reproduce parts. There isn't much I can do that is 100% accurate. I am good with sheet metal. What parts exactly are you thinking of?
It is something to consider. What parts are you thinking of?
I am apart of the DeLorean Midwest Connection. I have done some appearance requests of local locations. I personally don't like to hand over my car to be driven by anyone who has never driven a...
I can speak from experience that I have been living out this concept for the past two years. Please go the the "Hissem" post in the BTTF posts. There you will see my home made "NON DESTRUCTIVE" time...
I took a good hard look at this video to see or not to see the seat belt. I always wear a seat belt, and it does look like a wear a seat belt. If you open the video to full screen, you can see the...
Here are some videos I made on a typical day as I was going to work and leaving work.
https://youtu.be/vFSxT-1VQ-c
https://youtu.be/ETDwX_XGdeM
https://youtu.be/Cn60mMgA3Ic
No VIN 5754 is my time machine and it is reversible. You can go to the HISSEM page to see all what this time machine is about.
I have not reversed the car back to stock. It is too much fun leaving it this way. If in the far future that the BTTF franchise fades away and no one cares about the movie or time machine, then the...
I was expecting to see Christopher Lloyd at any moment, but when I turned around, there he was ready to climb into my car.
I had the privilege to have Christopher Lloyd "Doc Brown" sit and sign my car at an appearance at the Riverside Theater in Milwaukee.
I started out with the plutonium reactor on my car all summer long. I then had to convert to the Mr. Fusion by Oct. 21st. I could not go further into the future without the Mr. Fusion. I made it easy...
Yes This is the same car you saw that day I drove up at DMC Midwest. I was leaving the car there for the week to get the windshield replaced. I had bought it with the windshield cracked. That was one...
That would be a big challenge to do a conversion with the corner windows still in place and to try to mount full flux bands. You might be able to do that if you tap into the black vent between the...
Here is a link to Channel 4 TMJ4 NBC in Milwaukee http://on.tmj4.com/1M0gLS6
Hi Stan,
That would be my car. I have a thread post under the BTTF vehicles page titled "Hissem". I posted many pics of how I made the time machine without permanently altering or damaging the...
It took about 4 months of free time this last winter. This was the best way to pass the time with snow outside, and I had a goal to be done when the snow melted. I have had a life time of practicing...
I mostly use this Mercury capsule at EAA's Airventure in the Kidventure section of the week long airshow. Last year I drove my DeLorean to and from the airshow every day. I was able to park it in...