Search:

Thank you, Dave!

Thanks again, everyone, for the advice. Results are marvelous. I had all kinds of worries about weirder issues going on, but the door just needed an all-out assault on grime. I mainly just used an...

Awesome. This is mainly what I was after. But I appreciate all the other advice!

Thanks, all. Here's what I'm having trouble with. I'm not really ready to take on anything relating to blending or grain. Just deep cleaning.

Is there a pad you'd recommend that's only for the...

Hey, everyone. I'm getting ready to tackle the color difference on my driver door. PO replaced the quarter, so the dullness of the door stands out like a sore thumb.

I'll go at it with BKF and a...

Sounds good, guys, thanks. It?s worth the trouble to get the cluster back in. I just got the yucky news that my binnacle is unrestorable anyway, so back in the whole thing goes for now.

Folks, is it okay to drive without the instrument cluster? I have the binnacle out for restoration and need to get to a local shop while that's going on. I see some comments that the alternator won't...

Awesome, everyone, thanks. I'm seeing a lot of caution about the oil itself. Just did an oil change 2 weeks ago. Not overfilled, exactly halfway between the notches, and used Castrol GTX 20w-50.

I...

Hi, everyone. Thinking about how to approach my constantly wet rear engine and trans area and putting together a list of the usual suspects before doing a real good cleanup then observation.
...

Greetings, all. In search of the following:

110352 late gray parking brake carpet cover

W300009 wide gray arm rest caps with the angular outer edges

Thanks, everyone!

Danny

Perfect, Andy. Just what I needed. Exits the body next to the passenger cable exit, under trailing arm, swoops way up (partially concealed by the body), then over to the rotor. Stays on the outside...

Andy, this is great, and I do need driver's side. Do you have a photo capturing the entire visible part of the driver's cable? From body exit to caliper?

I would have gladly made a recording if it made the noise again. Nothing on the way to the local guy to get an opinion. Not a hint of a thump. I thought it had something to do with the change of...

Yep, 17 mm. There was definitely no wiggle. The driver side crossbar bolt did accept tightening about a half turn with a small cheater bar. I didn't want to go more than that. The torque in the...

Hey, Shannon. Several days ago I grabbed the left end of it, attempted to jostle it, thought it was secure, and didn?t give it another thought. I?m going to be very embarrassed if I go home today and...

Re your last note, you?re right to point that out. Another poster was describing a sound he was getting as someone smacking the firewall with a piece of wood. Very close to what I?m getting but even...

Todd, been reading thru this thread and I appreciate all the advice. Want to be totally clear on something. There are no new bearings out there that are going to solve the problem of what is...

Thanks, Dave. Your advice confirms my thoughts about the throttle assembly playing a role.

My ISM appears to be new. And it's definitely smaller than stock, with a segment of hose cut out as a...

Little bump.

Was hoping to get some insight on the curb idle setting's interaction with the idle circuit.

Hi, everyone. Quick background.

Pretty new owner here. Got 10620 in April. One of the teeny-tiny clean-ups I wanted to do was reattach the rear 5-module cradle to its metal bulkhead. It was just...

Thank you for those starting points, Dave M. and David T. Will report back!

Dear folks, first post. Joined the D family in April. Passenger mirror quit working recently. Was fine and then it was done. Moves around freely when you push on the edges. No noise from the housing...