FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: jamesrguk

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. [Frame & Body] These headlight side trims took a fair bit more...

    These headlight side trims took a fair bit more work than I thought to get them to look just right, but I'm really pleased with the result.

    Now available from DeLoreanGo...
  2. [Frame & Body] I think this is as close as I'm going to get with...

    I think this is as close as I'm going to get with a version that is thin and flexible enough to fit most cars as there will always be some car to car variation.

    Counter sunk screw hole now...
  3. [Frame & Body] Regards pricing, I'm not sure to be honnest, it's...

    Regards pricing, I'm not sure to be honnest, it's the finishing off that will take the time and effort, and until I have a version I'm 100% happy with (version 4 printing as I type) I don't know...
  4. [Frame & Body] Quick update, version 2 printed and roughly...

    Quick update, version 2 printed and roughly finished.

    Version 3 will have slightly different sized grooves to look more like the original. It will also have counter bored holes, the only way to...
  5. [Frame & Body] It's not really ready for sharing, this is just a...

    It's not really ready for sharing, this is just a 1st shot attempt.

    Sent from my SM-G920F using Tapatalk
  6. [Frame & Body] Ok so bear with me on this... I had a few...

    Ok so bear with me on this...

    I had a few minutes this evening and so working just from a photo I found online I drew the headlight trim peice in CAD and quickly printed one out.

    I have to say...
  7. [Frame & Body] Yes making a mold and then casting in resin would...

    Yes making a mold and then casting in resin would probably be quicker, and require less finishing.

    But I can't imagine that there will really be that much demand for them.

    Judging by size...
  8. [Frame & Body] I don't want to duplicate work...

    I am very happy to CAD these up and 3D print them, I usually 3D print in PET-G which I'm sure would be fine for this application.

    I don't want to spend time modelling them up in CAD only to find...
  9. Replies
    170
    Views
    45,331

    Well found, quite a novel solution, I now need to...

    Well found, quite a novel solution, I now need to come up with something more elaborate...

    J
  10. Replies
    170
    Views
    45,331

    I thought it would be hilarious to make a holder...

    I thought it would be hilarious to make a holder with a gimbal which hung from the door.

    hmm, my wife's out tonight so I have some free time and a 3D printer...

    perhaps not.
  11. [General] Good effort, I CAD/3D print quite a few parts for...

    Good effort, I CAD/3D print quite a few parts for my car, that looks like a very elegant solution.

    J
  12. Replies
    12
    Views
    716

    [Engine] is there anything inherently wrong with the original set up

    Is there actually anything wrong with the original design? OK having the radiator so far away from the engine isn't ideal, but most issues I hear or have experience (during 19 years of ownership wow...
  13. [General] That is a flexible map light, that is just the...

    That is a flexible map light, that is just the switch to turn it on and the flexible light arm looks to have been pushed down into the glove box, it's a bit like the one below.


    60022
  14. [General] I should imagine it will take a little while for...

    I should imagine it will take a little while for this to find its way to the UK, but I did speak with a local 'semi-independent' cinema who were aware of the film but had no details of the UK release...
  15. [Suspension] Ahh yes I did hear about a washer related thing...

    Ahh yes I did hear about a washer related thing some years ago but I don't recall it affecting my set so all good.

    J
  16. [Suspension] Are SPAX failure prone? I guess you're seeing...

    Are SPAX failure prone? I guess you're seeing quite a decent number of cars in your workshop, but I know quite a few DeLorean owners who have been running Spaxs shocks for a number of years (myself...
  17. Replies
    34
    Views
    2,011

    Black self-adhesive velcro (hook & loop) is the...

    Black self-adhesive velcro (hook & loop) is the way to go, you can take off your plate for car shows and the black velcro is barely visible, also you can keep the plate in your car and drive without...
  18. Replies
    25
    Views
    2,175

    [Suspension] I thought Rob had actually had them in place for...

    I thought Rob had actually had them in place for some time?

    Either way given that Mike Loasby made them years back I'm surprised that no one has tried to replicate them in some way, surely upper...
  19. Replies
    25
    Views
    2,175

    [Suspension] Why no replication of the Mike Loasby lower wishbone LCA

    Just shows that there are quite a few solutions for the front suspension.

    I have DMC Go's beefed up LCA's and the SS outriggers on my car, it certainly feels more comfortable under the combination...
  20. Replies
    33
    Views
    10,092

    I've had these on my car from DeLoreanGo for over...

    I've had these on my car from DeLoreanGo for over 10 years, my car's driven in all weather and they're still like new.

    Despite routinely jet washing my car the 3D DMC logo, which I would expect...
  21. Door headliner trim piece to cover warped edges

    I was tired with the look of my headliners from outside the car as they had warped long the edge which is visible from the side door windows, I've noticed this on quite a few cars at various...
  22. Replies
    97
    Views
    19,842

    [Suspension] Bill, Any reason you couldn't put 2 of these...

    Bill,

    Any reason you couldn't put 2 of these on each arm to fully triangulate them?

    J

    Sent from my SM-G920F using Tapatalk
  23. Replies
    33
    Views
    10,092

    Not sure how thick J.H's stripes are, most of the...

    Not sure how thick J.H's stripes are, most of the reproduction stripes are thin vinyl and as such can simply be wrapped around the end using a blunt plastic spatula of some kind, thicker stripes may...
  24. Replies
    2
    Views
    779

    [For Sale] Ron, I completely agree, I had intended for the...

    Ron, I completely agree, I had intended for the single photo of the black frame to be in position 1 but before I realised they were in the wrong order someone had bid, at which point you canít change...
  25. Replies
    2
    Views
    779

    [For Sale] DeLorean Lisence Bezel Photo Frames

    I made these some time ago and have had them on display for the past 6 months at home with family photos in, they get lots of comments and are quite striking.

    With Christmas upon us I'm looking to...
Results 1 to 25 of 218
Page 1 of 9 1 2 3 4