When balancing a wheel I would prefer they use a lug centric adapter or "finger plate" rather than the universal pressure cup on the wheel balancer. The cup can scuff the surface of the rim. But a...
Type: Posts; User: Fox2506
When balancing a wheel I would prefer they use a lug centric adapter or "finger plate" rather than the universal pressure cup on the wheel balancer. The cup can scuff the surface of the rim. But a...
Alright I got it in.
I hoped the new motor would relieve this issue but I took a video to show what the old motor and now the new one both did. They push on the outer skin when the window is...
Yeah it’s important. I put my car in the shop to concentrate on fixing leaks and so they changed all seals as part of the job. Suddenly both doors leaked through interior trim. This was why.
...
https://uploads.tapatalk-cdn.com/20171111/6e0508dda37ad74f28e9b711d81c9a41.jpg
Sent from my iPhone using Tapatalk
I was investigating why I had water coming into the interior through both of my doors and found that the lower door sill seals were installed without accommodating for the drain holes. Thought I...
To shed more light on the issue, the car was converted to EFI and needs a little tuning. When it's cold it stalls out at stops. Being a manual car and living in on a hill, I have no choice but to...
Solved. Battery probs.
Stuck in a parking lot atm. Hit a bump. Radio slowly fizzled out and then flickered on and off. Then noticed turn signals weren't working. Engine started surging heavily at idle. Stopped in a parking...
Sold.
I apologize I didn't get to everyone. fcfs.
I have a few PM's to go through. So this is probably sold. Will update.
I have a used Stage II exhaust for sale. Installed in 2009/10. No gaskets. 10K miles +/-
Replaced for other modifications. Furthermore, the muffler did not appear to sit squarely behind the...
My driver door arm rest is broken and leather pulled back. I'd like to replace it with the late style with pull strap.
The late strap is important because my doors are messed up and this strap is...
Just the dash indicators aren't' working, or the signal lights aren't flashing all-together? What about hazard lights.
Check the heater core foam seal in the driver foot-well where the pipes come out. Without that foam, air exits the duct work before passing the heater core. Makes air coming from the vents feel weak...
Weren't early doors glued together where the outer skin meets the frame, and later doors welded? On my 81 (if I recall) you can see the deteriorated glue and if you jiggle the door you can feel the...
They said brushed "aluminium," not "aluminum." It's British for metal.
The upside is fewer moving parts and smoother speedo action. Can solve a bouncy speedo issue. It can also get rid of noise that worn cables/counter may generate.
Good time to do a lambda counter delete with a solid speedo cable. Look at the electronic cluster that includes the door chime and make sure its all snug (hangs on a bracket that can come off). Mine...
Previously I posted that my headliner was wet due to screw holes, but I just found the underlying issue. http://dmctalk.org/showthread.php?8870-Screwed-in-headliner
Today, in the melting snow, I...
Took off my cat and soaked it in solution overnight, hoping to clear any possible obstructions. I also did one more injector test at half throttle this time, and at 60 seconds. Fuel looks fine (seen...
What I find odd is that injectors 5 and 6 were different levels the first time and then they were the same the second time. 5 dropped to normal but 6 did not increase like I expected.
Then, 2 and...
I can't get a better view inside the cat.
Did an injector test. Two 60 second trials at full throttle. For the second trial I swapped 5 and 6, as well as 2 and 3 at the distributor. Injectors...
Driver side cat looks clear, using a flashlight and mirror (I can see the square pattern/it's not caked over). Perhaps other parts I can't see are clogged though.
I noticed that the input side...
I did just replace it, thinking it was the issue. It may have helped a little.
The car did run rich for a long time. I suppose this could cause that gargling sound? Not hard to pull the cat on a stage 2. Or just do a back-pressure test.