Search:

New and Replaced:

Engine rebuilt at 48k w/ all new seals/gaskets, etc.
Radiator Fans *Hervey’s low voltage/High Flow
Blue Silicone Coolant hoses w/SS Lined clamps
Fuel Pump / Accumulator /...

My key broke off in the ignition tumbler... Carefully took it apart and got the broken piece out... All the 'tabs' are in the correct place when reassembled... Now, when reassembled completely, the...

Red Tek from Amazon is readily available....

If your alt is not putting out enough juice (as the original won't) go ahead and upgrade to a 100 or above amp... Not that expensive and worth not having other issues (like a/c stalling the engine)...

I found Fusion tires on line... DMCH says they use the 225 rear when replacing... Fusion is inexpensive and so far so good. Totally rebuilt the entire suspension, mechanical and ran out of $$$ :-) ...

I would like to attend also. Please post address for the meet... Thanks,

What shocks did you replace them with? I put Hervey's in and don't like them... Looking to replace to get a smoother ride...

thanks,

Rtcraver
#1815

I finally finished restoring 1815 with just about everything under the frame and rebuilt engine etc... Now that I can drive it on a daily basis, the ride is Exetremly rough. Pulling into my...

Who did you get them from?

Sent from my SM-G920V using Tapatalk

Call John Hervey


Sent from my SM-G920V using Tapatalk

Try NAPA part # 641-4271... really close and look good..

Sent from my SM-G920V using Tapatalk

Do you have a warm up regulator?

Let me know if you want to sell the carb conversion manifold, etc... Thanks,

RTCraver

George,

Call Rob, he will work with you. You don't need to do orders on the internet only... Good vibes from Rob and Jessica....

Tod Craver

Got them from you over a month ago and they act like the car was Brand new... Good Stuff... :-)


Tod Craver

How many have you converted to Carb and how satisfied overall with the results. Who/ Where did you get set up from?

Thanks

Tod #1815 Auto

Anyone know where I can get a gasket for the Air Mixture Control unit? What would a Volvo/Renault, etc. part # be... Ordered it from one of our Delorean suppliers a week ago and still don't have...

What is the website where you got your power steering unit?

thinking about doing a header setup (from Hervey over the winter w/ Flo's for mufflers. Already have cold air pipe alone and as I said, the Cats have been hollowed out before I got the car. ...

Looking into swithing 1815 to Carb from the K-Jet.... Anyone have access to an Intake Manifold that will work on the PRV? And what Carb is recommended?

Thanks,

RTC

this may sound dumb, but....
Check to see if both sides of the engine are heating up. I had an issue with backfiring, no power etc, and it turned out the guy who redid the engine did not set the...

Are you willing to sell the carb setup alone? If so, what kind of $ are we talking.

Thanks,

RTC

I'm interested. [email protected]

So, I'm sure this happens to others...
Is there a way around the issue of the A/C fan/duct closing when accelerating? When I start out, the A/C blower stops until I let up on the Gas... Any...

Keep me in mind, very interested.... [email protected]