Search:

Type: Posts; User: Henrik

Page 1 of 20 1 2 3 4

Search: Search took 0.27 seconds.

  1. [General] Thanks Josh. For a 3/16" diameter clevis pin,...

    Thanks Josh. For a 3/16" diameter clevis pin, 2.85" useable length is the longest I can find anywhere, but I believe I need a minimum of 3". However, I base that on the added thickness of the little...
  2. [General] Correct, but they all have the spring-loaded...

    Correct, but they all have the spring-loaded ball; not anything that would stay in place.



    Great! I might just reach out to the seller and see if he can sell me the clevis pins, only. If you...
  3. [General] I appreciate it, Josh, but: - the eBay option:...

    I appreciate it, Josh, but:
    - the eBay option: Kinda silly to buy a whole new spacer kit when all I need are the clevis pins; besides, those may not be the dimensions I need
    - the McMaster option:...
  4. [General] A challenge for you guys!

    Are you aware of ANY vendor that offers a Clevis Pin with these dimensions???

    51739

    Why do I need this? Well, I have bought Delorean Europe's vented rotors and given that the calipers are...
  5. [General] McMaster (http://mcmaster.com) for sure. Their...

    McMaster for sure. Their vast selection, hyper-efficient and no-nonsense website with logical filtering functions and access to drawings for all of their products makes them my go-to place.

    Yes...
  6. Replies
    9
    Views
    777

    Very nice! So glad to see one more D owner...

    Very nice! So glad to see one more D owner joining our exclusive "Delorean engine swap" community! Also, extra kudos for applying it to a D that in a lot of people's mind may seem like it was too far...
  7. Replies
    39
    Views
    1,792

    [General] Don't forget improved suspension + upgraded...

    Don't forget improved suspension + upgraded brakes.

    Sent from my SAMSUNG-SM-G920A using Tapatalk
  8. Thread: Manual Swap

    by Henrik
    Replies
    8
    Views
    308

    [Wanted] Go to.my blog here:...

    Go to.my blog here: deloreanvr6conversion.blogspot.com and check out the May 2015 and June 2015 entries

    Sent from my SAMSUNG-SM-G920A using Tapatalk
  9. Replies
    16
    Views
    542

    [Suspension] Aha I get it now. Thanks Arran!

    Aha I get it now. Thanks Arran!
  10. Replies
    16
    Views
    542

    [Suspension] Arran, I don't mean to criticize but those...

    Arran,
    I don't mean to criticize but those installation instructions are not clear to me. Are the instructions suggesting to bore out the hole of the top of the steering knuckle, where the upper...
  11. Replies
    16
    Views
    542

    [Suspension] Here are the dims. I did not define the vertical...

    Here are the dims. I did not define the vertical relationship between the holes and the grease nipple. Let me know if you need that too.

    If your science experiment is a Nobel prize winner I hope I...
  12. Replies
    16
    Views
    542

    [Suspension] So Ed's ball joints are different from the...

    So Ed's ball joints are different from the standard ball joints supplied by the DMC network in the US? If so, in what way?

    Well, lucky me: I just purchased a new set of LCAs from Ed and they came...
  13. Replies
    16
    Views
    542

    [Suspension] Sure! Today or tomorrow.

    Sure! Today or tomorrow.
  14. Replies
    16
    Views
    542

    [Suspension] Great to hear from both Rob and now Josh that...

    Great to hear from both Rob and now Josh that these upper ball joints are trash. Will order new ones.
  15. Replies
    16
    Views
    542

    [Suspension] Great input - thanks. Both UCAs are straight...

    Great input - thanks.

    Both UCAs are straight as an arrow. The right side LCA was indeed slightly bent backwards (I have bought new LCAs for both sides) but not really enough to cause the upper...
  16. Replies
    16
    Views
    542

    [Suspension] Upper ball joint question

    The swaged part that keeps my upper ball joints in place are not even and round as I would have expected, but more like wave shaped - see pictures. It's the same on both upper ball joints. Other than...
  17. Replies
    6,522
    Views
    749,247

    [General] Working in the kitchen? Are you nuts? He is only...

    Working in the kitchen? Are you nuts? He is only driving through the kitchen to get to the garage :) Seriously, Fernando, you have a neat and organized work space and.... yes... those ramps look a...
  18. Replies
    28
    Views
    1,328

    [Suspension] I'm currently in the process of converting to the...

    I'm currently in the process of converting to the Drive Stainless/QA1 setup in the front, and found that my stock right front LCA apparently had taken a hit in the past and was crooked. I went around...
  19. Replies
    28
    Views
    1,328

    [Suspension] Matt's DriveStainless/QA1 shocks and springs come...

    Matt's DriveStainless/QA1 shocks and springs come with instructions. Yes, the lower front spring cup needs to be removed (spot-welded; easy to remove); an edge on the LCA also needs to be shaved a...
  20. How To: Remove bushings from Upper Control Arm using simple hardware

    The Upper Control Arm bushings can be difficult to remove without distorting the UCA's sheet metal flanges and require just the right adapters to do the job. As luck would have it, some simple chain...
  21. Replies
    3
    Views
    306

    [Brakes] Just wanted to mention that Ed/DMCEU also offer...

    Just wanted to mention that Ed/DMCEU also offer cross-drilling @ 60 Euros for his ventilated rotors.
  22. Great feedback you guys! Thanks!! I'll see if any...

    Great feedback you guys! Thanks!! I'll see if any of my local auto part stores have a ball joint separator in their loaner program.
  23. upper/lower ball joints stuck in steering knuckle

    How do you separate the upper/lower ball joints from the steering knuckle? I have of course removed both of the castellated nuts but both ball joints are jammed into their respective knuckle...
  24. Replies
    8
    Views
    749

    Both statements are utterly true. Ed put up a...

    Both statements are utterly true. Ed put up a goodbye video on youtube where he said something to the effect of Discovery wanting to spend less time on the actual, hands-on repair work which is a...
  25. Replies
    30
    Views
    2,454

    [General] Just to close the loop on this: I circled back...

    Just to close the loop on this:

    I circled back with Ed who told me that the wider (non-spacer) caliper in Brake Kit 1 is indeed a new design. Dimensions are identical to the stock caliper,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4