FRAMING JOHN DELOREAN - AT THEATERS THIS WEEKEND & ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: Ron

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. [Electrical] Putting 12v on the center terminal (Black/Orange...

    Putting 12v on the center terminal (Black/Orange wire) of the fan fail module's socket should turn the light on.
  2. Replies
    3
    Views
    155

    [General] http://dmctalk.org/showthread.php?12909-How-To-Set...

    http://dmctalk.org/showthread.php?12909-How-To-Set-CO-Dwell


    MORE HERE
  3. [Electrical] I thought there was a How To Guide in the...

    I thought there was a How To Guide in the Resource section here, but didn't see it.

    Check this out for 'fun with the clip'- https://www.youtube.com/watch?v=358qaLbb-Sc
  4. [Electrical] You might be able to clean this guy up with an...

    You might be able to clean this guy up with an ink pen eraser or fine sandpaper.
    Be very careful taking it apart -- Some parts can be can be very brittle!
    60389
  5. Replies
    3
    Views
    183

    [Fuel] 1/2 turn is a lot, but it looks like you might be...

    1/2 turn is a lot, but it looks like you might be good if you set it to 40 (+/- ~5 swing).
    Don't forget to plug the adjustment hole when reading...

    P.S. Congrats!!
  6. Replies
    29
    Views
    992

    [Engine] :shocked:

    :shocked:
  7. Replies
    29
    Views
    992

    [Engine] No luck??

    No luck??
  8. Replies
    20
    Views
    962

    Wrong Mike.

    Wrong Mike.
  9. Replies
    29
    Views
    992

    [Engine] I disagree. According to Permatex's 10 Most...

    I disagree. According to Permatex's 10 Most Common Gasketing Mistakes:
    "10. Using a gasket maker as a dressing on a conventional gasket.
    This might be the most common gasketing error of all. Many...
  10. Replies
    29
    Views
    992

    [Engine] I'm thinking we're not all on the same...

    I'm thinking we're not all on the same page...what we are saying is:
    1. Paper gaskets (used between pump and engine) should never leak, ever!
    2. The pump seal (used between the pump housing and...
  11. Replies
    29
    Views
    992

    [Engine] Cool!...I think he will spot the problem.

    Cool!...I think he will spot the problem.
  12. Replies
    29
    Views
    992

    [Engine] Ah, OK. When you said "seal" I thought you meant...

    Ah, OK. When you said "seal" I thought you meant the shaft seal...why David an I said to fill it with water...

    Since it is leaking at the gasket, something is probably wrong with the mating...
  13. Replies
    29
    Views
    992

    [Engine] ??? Sounds like he was saying the gasket is ok...

    ??? Sounds like he was saying the gasket is ok now, ie, it only leaks air at the seal...

    If so, I'd suggest you fill it with water/coolant and check it.
    Did you let it run a bit before testing...
  14. Replies
    2
    Views
    162

    [Wanted] Have you seen this?...

    Have you seen this?
    http://dmctalk.org/showthread.php?17434-Body-Panels-and-anything-else-someone-may-want-from-parts-car
  15. Thread: Warm Up Regulator

    by Ron
    Replies
    2
    Views
    157

    [Wanted] Yeah, it depends on the vendor and what's been...

    Yeah, it depends on the vendor and what's been done to it. Can you elaborate on this? Maybe post a pic?

    I have some WUR pieces, a good one, an older style one that some of the vendors may accept,...
  16. Thread: Faulty tach.

    by Ron
    Replies
    1
    Views
    138

    [Electrical] Sounds like the tach since #9 feeds the working...

    Sounds like the tach since #9 feeds the working oil pressure gauge too. But I'd try to check it right off of the tach's terminals...or pull the tach and feed it right off the coil.

    Check out this...
  17. Replies
    18
    Views
    1,298

    :biggrin:

    :biggrin:
  18. Replies
    8
    Views
    358

    [Brakes] I found it odd that the only mention of this...

    I found it odd that the only mention of this adjustment I could find in the manual(s) is where they say to mark the cable adjustment in the manual transmission removal procedure.
    (I had to steal...
  19. Replies
    18
    Views
    994

    Lots of them here:...

    Lots of them here:
    https://deloreanindustries.com/search.php?search_query=brake%20caliper&section=product
  20. Replies
    8
    Views
    358

    [Brakes] You might want to adjust both sides at the same...

    You might want to adjust both sides at the same time:
    Do the adjustment for cables 12 & 13 first (at arrows) making sure the unnumbered swivel piece (circled) remains perpendicular (else it may bend...
  21. Replies
    19
    Views
    929

    [General] Congrats! I haven't seen one that the...

    Congrats!


    I haven't seen one that the correct orientation and a heat gun wouldn't take care of...
  22. Replies
    16
    Views
    1,872

    [Heat & A/C] "60 A"! :thumbup: If you didn't load the...

    "60 A"! :thumbup:


    If you didn't load the thermal breaker during your tests, you might try jumping the Brown (N) wire to the Pink/Black (K/B) wire at #4 relay's socket...
  23. Replies
    18
    Views
    1,298

    :deviltail: vBulletin says they "have the...

    :deviltail:

    vBulletin says they "have the problem slated to be fixed, but it is not high on the list." There were similar complaints on Twitter, eBay, etc. when I looked at it back when. (Note,...
  24. Replies
    18
    Views
    1,298

    It's stripped "immediately upon download". ...

    It's stripped "immediately upon download".

    iirc, ALL pics are converted to JPG.


    But, but...but the POS iPhones put the data there, creating tasks for others to contend with.
    ...Apple has...
  25. Thread: Mystery Relay

    by Ron
    Replies
    11
    Views
    415

    [Electrical] The wire colors match those for the Hot Start...

    The wire colors match those for the Hot Start relay. The idea was abandoned by DMC...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4