Search:

i am running the exact same coil with a GM ignition module

Do you know how hot your coil gets?
Mine can get pretty hot uncooled

Verstuurd vanaf mijn SM-G996B met Tapatalk

Is this still an ongoing project?

Seeing as the newly presented GTO at Sema has a 17/18 configuration in OEM look wheels

Original Z7U inlet manifold for the PRV engine.
Drop in fit for the odd fire engine. Complete with injectors and fuel rails

Make an offer
Located in Holland,...

New crankseal and gasket. Also a new clutch just to be safe
And gave the UN1 a good...

Just velcro the plate to the fascia and place the bezel on top of that

I making a closing plate that sits between the WUR and valve cover out of aluminium to transfer the engine heat and closing the hole.

I am not gonna make a mess with RTV and this way makes future...

Went ahead and made sure all my fuel pressures where ok.
Found that my primary is spot on but my control pressure is to high. 65psi instead of 42-45

So took of the WUR and drill a hole in the...

After discovering a coolant leak flooding the VOD in my D i tore down everything to clean i all up.
Doing so made me realize it is utter nonsense to swap this engine for one that i really do not...

Finally got my new exhaust ready.. gives a whole new dimension to the car and the joy of...

Still fixing a coolant leak but i have a nasty habit cleaning and painting every part i take off. Even replaced 99% of all the M7...

Holland

I was never a fan of the luggage net and desides to remove it completly from the car. I had it tucked away under the carpet so the elastic is still i great shape.
Overall the net is in as new...

Indeed.. no carbs here.
Already found another Z7U inlet manifold for € 150 for a fellow owner.

I thought these things where scares?

Well.. i actually prefer a good used one or this project could go through the roof price wise.

First thing on the list to do when i have the engine completely in parts is to fix a hole due to...

One tiny setback.
Engine block was repaired some time with epoxy to fix a crack of some sort. A crack that leaks coolant.
Hopefully some weld can be done...

Lower crankcase on the Z7U has the engine bosses right at the center.. so i can not use that one. And if at all possible i would like to keep my factory engine complete untill i know the 2.5 runs...

Are there any other Peugeot, Renault or Volvo PVR's that use the same lower crankcase as our D?

Waterpump was altered by PO to run an external pump.

Egine itself is in good shape. VOD seems solid.
Turbo is histoy and one bolt holding the inlet manifold snapped unfortunately.


...

Only that this particular engine came from a Renault 25, was taken out and used in some sort of kitcar and ended up as an educational piece at an automotive high school.
That where i got it from and...

Bought one.. $230,-
EFI is in reach now :)https://uploads.tapatalk-cdn.com/20190305/ec2d607cd4aebd51765725d1b5171800.jpg

Anybody know what a complete Z7U engine from a Renault 25 Turbo would go for these days? I tracked one down and i need to get some prices settled.

thanks

Hi guys.. first post by me in a long time but with 2 kids running around and also being into R/C, attention was getting low considering the D.
I fix and maintain the car myself as i work on cars for...

Hi guys..

does anybody know what Nm value these struts have?
Thanks..