Just had a bunch of work done to the car and decided it was finally time to do a stereo upgrade so I could have Bluetooth and handsfree. It is a VDO Bluetooth/aux/USB headunit. I tried to get...
Type: Posts; User: cdmcali
Just had a bunch of work done to the car and decided it was finally time to do a stereo upgrade so I could have Bluetooth and handsfree. It is a VDO Bluetooth/aux/USB headunit. I tried to get...
Roughly 4 inches
I purchased the fan fail module from Dave McKeen and wondering how to install the bypass wire that comes with the kit. Wondering if anyone has a picture of how to install this. I asked Dave but still...
Wonder where I could get a wiring harness for this so I wouldn't need to cut the plug that goes into the switch. Would love to do something like this.
One of the best parts of owning a DeLorean. The smiles!
I was going back and forth about replacing my cigarette lighter with either USB or getting the updated Vanagon socket. I had some trouble getting the proper measurements from the vendor selling the...
Thanks so much. I guess I assummed that it was just going through some holes in the bottom and it did not have a channel or something. I will fiddle with it.
Thanks David, The tab on the bottom of the spindle is hitting the spring stop before the upper tab for the switch reaches the metal flap. It is going the full spin, just still not hitting the flap.
I was doing some work on my idle and noticed that when I floor the car, the throttle spindle is turning just to the point that it is going to hit the WOT switch but it never actually engages the...
Thanks David. Do you have a link for the Techron you recommend? Also, would running a higher octane just for the test help?
Hey everyone,
I went to go get my DeLorean smogged last weekend and it failed the 15 mph NO test. It measured 1269 aand the max is 1148. In the 25mph test it measured 935 with a max of 978. The...
Anyone know a replacement windshield washer nozzle? I see DMC sells the for like $22 and I usually always buy all my parts there. I had just placed an order and forgot to get one. Don't want to pay...
Thanks David I will give that a try. If I can find the other end of the wires....
I have disconnected the power lock solenoid cause it was stuck in a loop but I always drive with the doors...
Hey Everyone,
So I did the fuel pump recall instructions and the engine still ran after pulling the plunger on the inertia switch. So I ordered a new one from DMC and went to install it. I noticed...
Thank you Dave,
You happen to have a way of guiding me to which 9 pin connector to unplug? Pictures maybe? If I do this to kill the door lock circuit would I still be able to lock and unlock the...
I haven't modified the lock system at all. Now that the clicking of the breaker has stopped by removing that wire, do I have any thing to worry about? My antenna doesn't work anyway. Can I leave it...
I wonder why the switch kept triggering until I unhooked that small wire.
Thanks Elvis,
Can you tell me what the small red wire is for?
I stopped today to grab a soda and tried locking the passenger side door from the inside. I rarely have it work when I lock one from the inside and the other locks on it's own. I noticed the door...
I will be buying the din adaptor. I have kept every part I have replaced and want to be able to take everything back to stock if I ever desire to do so. How would you run the wiring for the power?...
Awesome Thank you for all the info and Pics. Gonna start looking around for parts and possibly do something next month. I just finished the doing a bunch of interior stuff and gonna give myself a...
I am debating buy the new faceplate and installing a new stereo. I know getting to the rear speakers can be quite difficult and I am wondering if the wires for the rear speakers can be used for a Non...
Got mine back from DMC California a few weeks ago after not running for 13 years. It is running great but wanted to do some interior restorations. When I picked it up I got a new dash, Binnacle,...
I have the exact same issue. What was the fix you Pm'ed to OP?
Not sure what happened in your reply. I think I got the gist of it though. Thank you