For your last question on anything else for replacement, for the front brake pads with the vented rotors up front I used EBC Green Stuff pads, which is what was recommended from Martin at DMC UK when...
Type: Posts; User: Grover
For your last question on anything else for replacement, for the front brake pads with the vented rotors up front I used EBC Green Stuff pads, which is what was recommended from Martin at DMC UK when...
Unfortunately, looking at the shipping costs lately I will have to adjust for a price increase to $23 dollars. Anyone who has messaged me before this still has the opportunity to get them for the...
Just my experience here with the PJ Grady struts. I installed a set and they lasted a few months and then lost a lot of lifting ability. I brought the set to PJ Grady and they were tested on some...
Hi everyone,
As I am gearing up to have a website of my own for a range of products featuring the logo and some other design ideas that I have, I am trying to clear out the remaining stock that I...
I had this exact problem in the past. Long story short, I had to replace the speedometer because it acted exactly like your video. I tried everything to get it to work and the only way was to buy a...
I'll throw in my .02 since I have port and polished heads.
I have a thread in the Mod section about my engine build, but long story short, with high compression pistons, port and polished heads, a...
The nut issue may have been caused by me, though I explained the situation very clearly to the company. The nut supplied on the angle drive snapped off on my unit. I had installed a set of Martin's...
Probably late to the party here, but this is what I used to surround my wires with near the UK Stainless Exhaust Headers.
Spark-Resistant Wrap-Around Sleeving
Silicone rubber coats this...
In that case, do you know the thread/pitch of the nut for 108347 (Figure 1), or even have a spare nut for the bolt? I am missing the nut and from what I am told it is a very odd size.
49169
I need to reach out too. I got a set at our Spring Social and about 3-4 months in they don't hold the door open without assistance to the top (was working fine, started not to open all the way in...
Thanks, both of these posts really help. I wasn't sure if the DMCH was per strap or not.
Either way, was looking for some feedback from someone who had any of them. I went ahead and ordered from...
Hi,
Just wondering if anyone knows if one or better than the other when it comes to the reproduction door straps. I am looking for a pair of the early style with D-rings.
Go online and find a place that will sell a CS-130 Alternator with the Iceberg upgrade kit. I had alternators that would die all the time in my car. I got tired of it and spent the extra money and...
Thanks, just throwing out some long shots.. :)
Was the car ever stored for a long period of time or have a old fuel at one point? Just throwing this out there but maybe one of the little screens inside the distributor is plugged up, causing a...
I will be back down near DMC Florida on in March (weekend of the 12th), I will be sure to get those better pictures I promised for you then!
I have a set of good used ones. Send me a PM and we can discuss. The only reason I swapped them out was I had my engine and transmission out and put the DPI stainless ones in.
In the meantime, this can work. I can take a better quality screenshot when I get home from my copy directly.
https://youtu.be/sueqDrq9VBw?t=28
This would be great to get this done! I...
I have a good screenshot I can send you from the one DeLorean Documentary that is really good, and as I mentioned in my email, I can stop by DMC Flordia the first weekend in Feb. to see if I can get...
Found my Proto-1 Dashboard pictures. Send me a PM with your email and I will get them over to you. They are not the best, but you could most likely use them to get close. If you require better...
I have a bunch of photos of the Proto-1 Dash. I was going to use them to make another dash t-shirt. They aren't the best quality but when I have time at home I will upload them here.
I had a shop do it.
I have the 3M ceramic tint on all my glass in the car. It greatly reduces heat inside the car and I absolutely love it. It is expensive but in my opinion 100% worth it.
Where did you get the lotus bushings from?
If you ever find yourself on the east coast around NJ I would be more than happy to let you check out what I've done. Additionally, if you have any questions just send me a PM and we can chat about...