This just popped up on YouTube a couple days ago. Dunham also owns a 75 safety red Bricklin as well as a DeLorean.
https://www.youtube.com/watch?v=OSP80Xr_O58
Type: Posts; User: Gregadeth
This just popped up on YouTube a couple days ago. Dunham also owns a 75 safety red Bricklin as well as a DeLorean.
https://www.youtube.com/watch?v=OSP80Xr_O58
Worth a shot, but if the plug is rounded even a little bit, you wouldn't be able to get the square socket on there. That was my experience, before going with the Gator Grip.
Mine was rounded as well but I went and got a 3/8 Gator Grip socket, and it took it out no problem.
...
I found myself saying "if only I had a lift" many times during this job. Without a lift, you're gonna be laying on your back, and that's what makes this a shitty job. I had a lot of trouble getting...
If it's the axle shaft leaking, you'll likely need to replace the axle seal and the o-ring. I just did my driver side this weekend. But I don't think an axle seal leak would reach the linkages, it...
I'm also interested in updates on this.
I've done exactly the same. When my D got lowered with Eibachs, the rear height was perfect but the fronts still sat a bit too high in comparison to the rears (the fronts aren't adjustable). With the...
That's April 12 1981 :)
I don't think the order matters, just that each state keeps their own records and you'll have to request from each state individually. Here in CA you just fill out a vehicle record request and it...
This works pretty well:
https://images.thdstatic.com/productImages/bdfb61a1-1d6b-4282-be93-563a5581b1c4/svn/blaster-lubricants-16-pb-ds-64_600.jpg
Blaster 16-PB Penetrating Catalyst - 11 oz....
I just replaced mine with a Champion brand from Pep Boys. The battery that was in the car when I bought it was a cheap one not to mention incorrect size/spec, but it worked fine and lasted more than...
Hey, thanks! Admittedly, I took the somewhat easier route. I just used sandpaper sheets and hand sanded it down as much as I could. I didn't do primer or a clear coat. Did about 5 or 6 sprays of base...
Thanks guys. I used SEM Bumper Coater 39253 Titanium.
Installed aluminum bars to fix the eyebrow issue
6529165292
Main reason for removing the fascia was to adjust the reinforcement bar to close down the fascia-fender gaps. Hood was also pulled back...
This might be the coolest mod to the Craig yet, nice work. You mentioned adding in the receiver and other electronics - does your setup still use the Craig's amps/preamps to output the audio, or are...
Mine stays loose also. I was planning on replacing the o-ring as well, thinking it would fix it. But I guess it doesn't?
You don't need to take the mirror assembly out. I've removed the side mirror glass on both sides to replace them with the convex ones. Was probably one of the easiest jobs I've done on the car. As...
I think the trans plugs are different than the engine oil drain plug (at least on a manual?). This is what the trans fill plug looks like:
63251
https://www.dmcnews.com/faq/n_chron.htm
Click on "DMC Options Mix". It doesn't show actual numbers but percentage breakdowns. According to this, 16.5% of 82s were grey/auto.
Some more reference pics here from when I replaced my bearings a couple years ago:
http://dmctalk.org/showthread.php?241-What-have-you-done-to-your-DeLorean-today&p=218157&viewfull=1#post218157
Is your rubber window seal in place? This one: http://store.delorean.com/p-9767-outer-wipe-seal-lh.aspx. It may provide the little bit of push the window needs to close properly.
Each headlight has two adjustment screws. One on top, one on the side. The lights on the driver side have them on the right (when facing them from the front of the car), and the pass. side have them...
All Sold
100 obo
Thanks. They've held up really well, considering I drive my car a lot. The rear fascia I haven't had to touch since, but the front I don't think I did a good enough prep on it or not enough coats, so...