so using a pick probe i found a few things. First off with the RPM relay socket jumped, the two wire fuel pump harness with only glow on the ground side.
the pick will glow at the inertia switch...
Type: Posts; User: smallclone
so using a pick probe i found a few things. First off with the RPM relay socket jumped, the two wire fuel pump harness with only glow on the ground side.
the pick will glow at the inertia switch...
i checked voltage straight from the harness.
I tested the pump hooked into the battery and the pump worked.
so i was driving and the car stalled. i have the dmc-h new fuel pump system.
i took a paperclip and jumped the rpm relay. nothing.
i checked inertia switch, its down.
checked fuse 7, its...
Thought it was 8mm square socket tool.... does anyone know the correct size for the drain plug for the final drive?
Right. With these gm style ones tho. The dcmh ones are the only ones i know that require an external check valve. Wondering why that is
Sorry to bump an old thread here but the DMCH pump comes with a check valve but these pumps do not. If these are considered cheap alternatives wouldnt a check valve need to be in place when using one...
in search of a good one. springs must be in good shape.
heres what ive found.
my car didnt have an inertia switch (lovely) and saw the pump and ground was just spliced together. i took those two connections and made a solid ground to a body bolt.
...
OK so i live in FL, it gets fairly warm here.
i drove the car 3 hours last weekend and started hearing the fuel pump struggling till then it wouldnt start. i had to push the car into the garage. ...
thanks for the info.
is there any how to guides on how to build this box?
the computer I got from the previous owner and he said it was rebuilt, not sure from where.
the filter was not swapped when the new computer was plugged in, so maybe that's a good place to start....
the original was melted yes. and I still have it. it was repaired but failed ultimately. id love to bench test this if I knew how.
Some auto trans problem descriptions I can think of might be:
- feels like it is starting out in 3rd whereby there is no power at low speeds. (not so much starting in 3rd but it does at times have...
so for all who remembered i had a cracked flex plate. while in there i saw the Gov harness was badly melted. the wires were repaired but the gov blew shortly after.
replaced the gov and took it...
How do people adjust the timing if the distributor is covered under the intake? It seems small tweaks are impossible because of where it is.
there was a witness mark and i think thats what got me in trouble but looking at it again i found a few markings in blue marker and lined it up to that. theres a very good chance that will do the...
so to fix a leak i had removed the intake and while putting it back on i cracked the distributor cap, so i replaced it and buttoned it all back up. i noticed while i was putting it all back the...
5750957508
material front passeneger side door peice. wouldnt reuse for door. good for extra material or recovering smaller peices.
$30 shipped. US only.
i have the stock header bottle. when filling coolant back into the car should the bottle have coolant in it filled to the MAX line at all times?
no vibrations but didn't really drive it.
yup rear main seal from Rob is going to be put in.
Rob was the one that said it was flex plate and he wasn't wrong.
56982
look what it was. look how cute this is. all cracked
they were there, i replaced them too.
ANNNNNND.. no. that didnt work. it altered the sound tho. its seems to be coming from the very top back of the intake manifold which is really off. i give up. its going to the shop in the morning.
thanks I hope so too, ill know tonight.
this is sold, thank you all that responded