Search:

I am hoping I found it but time will tell.

The system outputs are sinking circuit so power is always connected.

I found that I connected the turbo blow off valves in the rear bumper to the...

I am going to look at the battery voltage in the cal screen. when it is high (29V) and when it is normal (12V). All values in Perfect Tune have paralled the MS controller but I did not verify this...

EIN - Did you ever find out why your MS cut was cutting out on you on way to NERD meet?

The Tuner studio is showing the same as the Perfect Tune gage. The TPS was fully RED at the 173%. this is...

1st issue:
Anyone have issues before starting where you see 29V at battery voltage on PerfectTune gauge?
Also TPS shows 173%.

If I shut off/ turn on key a few times it will go to normal.

I...

Does anyone have a MS3 tune I can look at with both spark & injector tables?

I can't get my Idle down lower than 1300rpm. (with the idle valve plugged on the inlet)

Without plugging valve inlet...

I will go through & adjust R52 & R56 again.

I will be going through it again this morning but didn't see where I needed to change anything from when I first assembled. I probably missed it.

I added the 1K resister to the signal(bk) to +(bn) connection on the Banner unit. Still not showing up on RPM on Perfect Tune gauge or computer.

I will be checking square wave on output and RPM...

Does anyone have the resister value to pull up value from Banner unit?

Almost current wiring is attached.

Thanks

I thought the early cars had the speedometer that didn't go past 85?

I do belong to FB but also try to completely stay away because of "the waste of time suck".

I am connected to a veterans group to keep connected though.

I also come here to get questions...

Awesome. Thanks. I will be trying that tonight.

The views in the setup section of the Perfect Tune gauge using the 2 front buttons?

Could you tell me how you set up the "Perfect Tune" gauge for the multi quadrant setting?

This post it great!

Mine will never look this nice.

Excellent job.

Nice having another DMC in Mass.

Looks like you have been busy since you bought the car.

You picked the right place to get information. These guys are great and informative.

This is really nice & fits in the spot great.

Excellent job adapting this into the car!

I could see where just the standard material would stretch or not last without the backing material.

Hope you are having a great holiday weekend.

You are right. I bought the perfect gauge from DIYAutoTune readout. I liked where it was put on this build between door & drivers console.
It didn't take away from middle.

While you mentioned it....

That looks GREAT!

You did an awesome job on this. I also had never seen one other than black/gray. This looks just super classy & well done.

Are you thinking darker brown strap or same...

Thanks!

Yes, it is the twin turbo setup. I already bought the 2 valves. I am going to mount them in the bumper so I can just run short hoses. I was also looking at reducing the waste gate...

I have seen something close where they also put the white stitching on the black seats. Looked really classy.

Looks excellent so far. Looking forward to seeing whole thing.

I also like the black/gray. I just had whole thing apart last year working on the wiring/valves.

While apart I had the seats...

I have attached my drawing for my Megasquirt conversion. Please provide any pertinent information or critique.

Thanks.

This is awesome, thanks!

My family also owned an OEM shop. Did that for 20 years.

Part of the reason I am doing this is I am in management now & don't get to do the hands on anymore.

My...