Search:

Type: Posts; User: CriticalB

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    7,537
    Views
    1,105,900

    [General] I just finished the same job on my rear calipers...

    I just finished the same job on my rear calipers and starting the front tomorrow. Mine looked exactly the same as yours. I noticed last week that stopping didn't feel guaranteed anymore so I was...
  2. Slightly off topic, but has anyone noticed these...

    Slightly off topic, but has anyone noticed these are $700 on amazon now? Seems like mine was about $250 18 months ago. At this rate, a flux capacitor looks like a significant value-add for the car :)
  3. Replies
    20
    Views
    1,168

    [Frame & Body] If you canít find a good way to punch speaker...

    If you canít find a good way to punch speaker holes, or if you try and it doesnít look as good as youíd like, you might consider some cheap speaker grills from amazon. They have some low profile...
  4. Replies
    7,537
    Views
    1,105,900

    [General] All done and back together. A friend offered to...

    All done and back together. A friend offered to help with welding the crack. Ticking sound is gone and definite improvement in power! I'm super-happy with the results.
  5. Replies
    13
    Views
    540

    [General] I modeled a button to rebuild mine a few months...

    I modeled a button to rebuild mine a few months ago.

    https://www.tinkercad.com/things/3n496SCnHBz

    You can 3D print it but you're on your own for the electronics. I pulled an LED and button from...
  6. Replies
    14
    Views
    860

    [General] My car had similar brown water stains. I think a...

    My car had similar brown water stains. I think a PO recovered the headliners himself b/c there was about an inch of excess material that wrapped around under the door sill where it wicked up rain...
  7. Replies
    7,537
    Views
    1,105,900

    [General] On 2nd look, the gasket wasn't backwards, rather...

    On 2nd look, the gasket wasn't backwards, rather the corner was torn like yours so the gasket was off-center. I didn't take pics of those b/c they were otherwise unremarkable.

    My car's PO cut the...
  8. Replies
    7,537
    Views
    1,105,900

    [General] Had some free time so I started working on my...

    Had some free time so I started working on my exhaust. After adjusting the valves last week, I was still hearing a ticking noise and read somewhere the 2nd most likely cause would be an exhaust leak....
  9. Replies
    16
    Views
    416

    [Heat & A/C] If the mode switch is on vent, the recirculation...

    If the mode switch is on vent, the recirculation door should be closed, which its default position on anything except max AC. When this door is closed, fresh air is pulled across an ambient-temp...
  10. Replies
    16
    Views
    416

    [Heat & A/C] Is your blend door opening/closing when you...

    Is your blend door opening/closing when you adjust the temp knob? you might be able to see if the door is actuating from the passenger footwell. Even if the heater core isn't getting hot, maybe the...
  11. Replies
    4
    Views
    339

    [Electrical] I do have a 5-speed, so this makes sense. I know...

    I do have a 5-speed, so this makes sense. I know there are a few dead-end wires that only have a use in automatics and I guess this is another one.

    If, as the previous reply states, it is...
  12. Replies
    4
    Views
    339

    [Electrical] Whatís this?

    I was troubleshooting why my wipers werenít working and I found an wire was to blame. I may have knocked it loose when I reinstalled the heater box. Fixed the wipers but found this guy with no place...
  13. Replies
    7,537
    Views
    1,105,900

    [General] Adjusted the valves, painted the valve covers and...

    Adjusted the valves, painted the valve covers and alternator mount, changed the oil and transmission fluid. I thought it was shifting fine before, but now itís like a different car. Installed new...
  14. [For Sale] To clarify - the steering wheel does not include...

    To clarify - the steering wheel does not include the adapter. I needed that for the replacement wheel.

    Of course if anyone wants to trade an original steering wheel in good shape for the whole...
  15. [For Sale] Custom Interior - Steering Wheel, Seat Covers, Door Trim

    I've removed the custom trim pieces that were installed by a previous owner to get my interior back to a stock appearance. Ships from Madison, MS (39110). Asking $300 + Shipping for the whole lot. I...
  16. Replies
    122
    Views
    20,952

    [Engine] I have the island twin-turbo setup; does this...

    I have the island twin-turbo setup; does this make a difference as to which oil I should use?
  17. Replies
    7,537
    Views
    1,105,900

    [General] Rebuilt my original door key using a 3D-printed...

    Rebuilt my original door key using a 3D-printed button and an LED/switch that I borrowed from a cheap grill lighter.

    57666576675766857669


    https://youtu.be/jYnO9nmtyKE

    Not sure if the video...
  18. Replies
    346
    Views
    61,634

    A local museum received the screen-used BTTF2...

    A local museum received the screen-used BTTF2 hoverboard and self-lacing shoes about 2 weeks ago and hosted a screening of the movie. I bought tickets for the family and drove the DeLorean, but...
  19. Replies
    23
    Views
    1,451

    [Heat & A/C] I just got my vacuum lines sorted earlier this...

    I just got my vacuum lines sorted earlier this week. To make sure the mode switch diaphragm was working, I took out the radio and unplugged the rubber fitting from the back of the mode switch. I...
  20. Replies
    7,537
    Views
    1,105,900

    [General] Installed new evaporator and heater core this...

    Installed new evaporator and heater core this weekend and replaced all the missing/disintegrating foam in the cabin. While I was in there I replaced all the vacuum hoses with new silicone hose...
  21. Replies
    3
    Views
    307

    [Engine] I just did this job last month and can sympathize...

    I just did this job last month and can sympathize with you. As I recall nothing went back together as easily as it came off (except the radiator duct which snapped right back into place on the first...
  22. Thread: What's this?

    by CriticalB
    Replies
    6
    Views
    487

    [Electrical] Cleaned up the oil sender wire and now I need...

    Cleaned up the oil sender wire and now I need help identifying another connector. I had the console out this week found the connector in this pic just below the coin tray. Itís either pink/black or...
  23. Replies
    5
    Views
    312

    [Frame & Body] That's what I was afraid of. My original plan was...

    That's what I was afraid of. My original plan was to just call up a local windshield shop and have them remove and re-set it correctly, but I've read about how important the windshield is to the...
  24. Replies
    5
    Views
    312

    [Frame & Body] 57255 Now I see why the tint shop thought the...

    57255

    Now I see why the tint shop thought the glue was fresh.

    I picked at it with a putty knife and it pulled away with the consistency of uncured weatherstripping sealant. I was careful not to...
  25. Replies
    5
    Views
    312

    [Frame & Body] I'm going to take a closer look today. It looks...

    I'm going to take a closer look today. It looks like the glue might be spilled over to the trim, so I'll have to see if it will damage the trim to try to pull it back.

    I was afraid it might be PO...
Results 1 to 25 of 69
Page 1 of 3 1 2 3