I tried jumping the blue SW2 with a wire, and it immediately activates the blinking sequence without shaking the whole flux capacitor. However, once it runs through the 7 blink cycle, it stops again...
Type: Posts; User: GeneralLee01
I tried jumping the blue SW2 with a wire, and it immediately activates the blinking sequence without shaking the whole flux capacitor. However, once it runs through the 7 blink cycle, it stops again...
In the second photo, the 5 solder points near where it says S1 are connected to the 5 posts going to the on/off switch on the other side. I am not sure that is the part of this unit that activates...
Although I'd rather have a Diamond Select, I am working with this Yahtzee Flux Capacitor. This was a sealed unit that I opened and tried out to install in my car, and to my surprise I found that...
Just to update on this, the adjustment is now complete. Everything went very smoothly using the jig and I ended up reducing the tension by 4 splines. I am thinking that three may have taken it back...
I considered several other materials including wood, but due to the tight space I thought it may interfere with the tools and cause more of a problem. The sheetmetal is a heavy gauge and is backed...
To update on this, I have been chasing materials and tools, prepping the car, and building the jig to do the torsion adjustment. I have found a chip out of the glass on the left side where someone...
I didn't read the post about where to measure from prior to doing this last evening, but I hoped that this would still tell us what is going on. It is sounding like the driver side is definitely...
I did some testing of the torsion bars with the struts disconnected last evening, and the drivers door seems to have too much tension. Here are some pics of the results.
60913609146091560916
Last evening I installed new louvre struts from DMC and am very pleased with them. The upper ball cups were so rusted that I had to spray with WD40 and carefully work them loose, then sand and...
We finally were able to watch the film Sunday evening on YouTube after missing it on the big screen, and truly enjoyed it. Great job Tamir! I look forward to the chance to purchase a copy on DVD.
We were anxiously awaiting the release of the film in State College PA, but due to a family issue were unable to make it. I was wondering if anyone knew if there will be additional releases in...
Just signed it, I think it said it was at 436. It is so frustrating that they stopped making these, I used to run the 195/60-14 Radial T/A on the front of my 86 Tbird back in the late 90s.
No I didn't mean to imply that, just that the car is road legal and could now be driven if running. I'm taking it slowly with several other project cars also under way.
I agree the bottle looks pretty bad. I have no idea if it was ever driven in winter but it spent all of its winters in the outdoors. All I can really say for certain is that sometime between 1985...
For now I just cleaned the threads and reinstalled the top two because the bottom two now have no fastener to thread into on the inside of the bumper cover. I do plan to address that at some point...
59834
The plate has finally arrived making this the last item required to deem the car road legal. The install was not simple as one would expect, as the two bottom screws were seized and had to be...
When removing the original tires the other day, I was surprised to find a huge amount of corrosion inside the right rear wheel. The coating just peeled off in sheets exposing the white powder...
Actually the tag service called today and the plates are ready to be picked up so if the car ran, it could be driven.
Progress has been made on the '83 recently and although the weather has not been great, it didn't slow down the title process with the DeLorean now titled in my name. Last week I received new keys...
Congratulations on this huge accomplishment! We will certainly be going to see the movie as soon as possible.
I wanted to provide a quick update on the car so here it is. I attended a hearing regarding the missing title recently and it went very well ending with the judge instructing the state to issue a...
My thoughts exactly, and of course without checking with any other DeLorean owners before making such claim.
Hoovies channel is interesting and usually enjoyable to watch for the most part, but his DeLorean story leaves me with a major question. If he had such a difficult time finding parts and information...
That is an interesting topic that I have pondered many times over the years, and although I have not yet assessed the condition of the system after 20-30 years of neglect, the DMC is my first manual...
590245902559026590275902859029
I decided to begin by ordering new door struts so that I can access the interior more easily and begin to attempt to get the drivers door open. The outside door...