Thanks for clarification. Using a timing light I suspect there is no way the wrong mark would come into play as there is no way it would operate.
Type: Posts; User: Peno67
Thanks for clarification. Using a timing light I suspect there is no way the wrong mark would come into play as there is no way it would operate.
Got another thread going on some troubleshooting although I wanted to specifically question timing. Manual states 13 degrees bc. So got on number 1 cylinder (back RH side of car) and set to the...
Thanks Dave. I will double check but a last known it was hooked up and operating. Never know.
Started a thread about a year ago trying to help a work friend out with an acquired delorean by another friend with some issues. Working on it has been hit or miss although we are back at it after...
Thanks for the feedback. Seems like I remember reading that one can use 8 cylinder but I think you divide by 2. Maybe someone else will comment.
Well it has taken a bit longer than spring time to get the owner to get some parts. As a follow on to above items, we pulled the intake and confirmed the thermistor was bad and replaced. Checked...
Here is what I have figured out. I mentioned an oring found in the intake. Pretty sure this is for the airtube from the idle motor. Got a he'll of a vacuum leak under the intake area. Also found...
To follow on, the cleaned valve was installed. The car was started in a cold condition and the rooms would steadily fluctuate between 1000 to 2000 rpm. After warming up for a good period the rpm...
My partner in crime brought the valve to work this morning. We cleaned it and hooked up to a power supply and it is working. He is going to install tonight and see what happens and will also...
So today we started by checking compression to make sure no issues were deep. Then pulled fuel injectors. A couple of them had a cruddy spray pattern so we cleaned all of them. Also noted when...
Thanks for clarification. Does anyone k ow where to get a parts breakdown for the fuel distributer? The washer I mentioned on the plunger slide body appears that maybe it is suppose to be a...
Yes that is what I meant and have read and understand it's operation although haventbloomed into it. What I was wondering is is there any chance it could fail in the open position or not likely?
Today we pulled the fuel manifold/intake top off a d verified plunger was fine. A couple of I interesting finds such as an o-ring laying in the intake. The other thing and I am not sure of its...
As stated I am going to start with plunger and valve clearance. If anything it is one less item that could be in question. This is an automatic and has the microswitched on the throttle mechanism.
I have been doing some more book study and may have discovered part of the butcher job that may be a big problem. 2. I don't remember seeing a shielded wire on the O2 sensor and the sensor would...
Some pics as requested5483654837548385483954840
Yep, out of the gate going to check valve clearance and injector pattern for a start. i do believe the Lamba system is at least somewhat operational as one can feel the vibrations with key on not...
One more question, The mixture screw has been tampered with. Is there a good starting point to begin with as I have no idea how far off the thing is?
Thanks for the input. My next thought was to get the injectors out and see what we have. I work at a commercial aircraft repair shop and have some possible solutions to clear up the injectors if...
Hello all. First time poster. A friend of mine has a shop and works on cars moonlighting. One of his customers picked up a Delorean at an auction that wanted it gone through as it has been sitting...