DPI fuel lines are very nice, I used them when I did my frame-off. Full set from filter to hard return pipe. They look good and they are the correct length. New banjo bolts are included for a...
Type: Posts; User: 82DMC12
DPI fuel lines are very nice, I used them when I did my frame-off. Full set from filter to hard return pipe. They look good and they are the correct length. New banjo bolts are included for a...
I think a bunch of kids made that while drinking Cherry Lime-Ade's at Sonic. No stainless steel, no gullwing doors, no powertrain decided yet (hmm should it be electric or gas, or how about hybrid,...
Really makes you wonder how the Katmobile has a snowball's chance in hell of ever seeing the light of day... actually anyone who believes Kat will build a car is stupider than anyone who bought an...
Told ya :-)
If you have the engine and transmission out, it wouldn't be THAT much work to lift the body off the frame just enough so you can get the pipe in... if you really have to!
Here's the...
Nice video!
First of all, regarding the one piece clutch line, the one I got had 90 degree ends on both sides. This was OK however there was very little clearance for it when routing it around the...
Good point. Fact is, for $60K the car should be running perfectly and driveable.
If it's not even running right, who knows what else is wrong and you can assume the seller is overestimating the...
It's almost certainly a fuel problem, probably something in the control pressure circuit. The very first thing to do would be to get a k-jetronic specific fuel pressure gauge put on the car. Check...
I don't think you'll be able to do it. That pipe has a few bends in it that I don't think you can get up into the hole with the body in the way.
That being said, you can cut out the old metal...
While I had the intake manifold off, I got into a side project that I've had simmering for a while. It's known that DMC obtained the PRV engine (B28F) from Renault. In order to meet USA emissions...
This last weekend I took the car out for a spin after it sat for a week while I was on vacation. All seemed fine... until I pulled into my garage, got out, and found coolant dripping down the...
Today I went back to the tint shop to talk to the owner and see what he thinks about the rear view mirror attachment. He immediately offered to cut a hole in the film for the mirror to attach to the...
Yep that's a thing. Guess I don't drive at night much but when I do I dim the mirror and angle the side mirrors out!
Sent from my Pixel 6a using Tapatalk
Shouldn't be that bad at all if you have a machine shop do all the hard work, assuming your carrier pivot bolts aren't seized in the bushing sleeves.
Well that's what I'm saying. I am going to see what he thinks about it, he might decide to cut a square out of the film where the pad is so I can stick directly to the windshield again. I would...
I've been planning a 4-day road trip in my DeLorean for next month so I've been focusing on making sure I'm ready and reliable for all situations on the road. One thing I've been thinking about...
I wouldn't bother. Once you break all those M5 screws off and install new rivnuts, you'll have no trouble going back in there in the future if for some reason you have to clean or check the...
Well it's one of those gaskets that's impossible to replace without lifting the engine if it happens to leak. Well, actually it's not impossible but it's nearly impossible to do a good job of...
If you're going to put those lights on, I wonder if centered in the sides of the pontoons is actually better? There's not really much to see if you're putting them under the rear window. I feel like...
This project will take tens of thousands of $$$$, what's another $350? New injectors yes.
Sent from my Pixel 6a using Tapatalk
Hard to say, man. If there is a valve cover leak, that should be totally obvious just looking at the valve cover and where it sits on the cylinder head. If it's dry, the oil you see on the threads...
When I did my frame off I bought almost all my hardware from them. I always order double or triple what I needed so now I have a nice Rubbermaid bin organized and full of nice fresh hardware so now I...
It is in the y-pipe and has a black two-pin Bosch plug going into it
Sent from my Pixel 6a using Tapatalk
Sounds like you're on to something!
Sent from my Pixel 6a using Tapatalk
You should have 8000 - 12000 ohms on the thermistor when cold. If it's open circuit then yep it's either bad or the plug is disconnected, if you are trying to measure it at the ECU. Where are you...
That should definitely not be necessary but hard to argue if it works! Is the rear guide out that far also? Kind of sounds like someone glued the glass into the carrier incorrectly and this is the...