All my cars have ceramic film and it truly is a blessing especially in S.FL. I am most likely going to add another layer to the rear glass as it's too light for night driving. Most cars headlights...
Type: Posts; User: Timeless
All my cars have ceramic film and it truly is a blessing especially in S.FL. I am most likely going to add another layer to the rear glass as it's too light for night driving. Most cars headlights...
Did you consider HEI ignition and dumping the ballast resistor?
My car sat for 20 years and the original injectors were ok. It was the K-jet components that were rough from old fuel. I converted it to EFI.
I love the progress and documentation. Have I mentioned belmetric before? belmetric.com
That I cannot confirm.
Have you considered the Wurth semi-gloss black paint? It's a wonderful product that lays down well without primer. It was recommended over SEM by my body shop owner. I like it a lot.
I'm in the process of making some brackets now. Planning to bolt through - no rivets. Will report with photos once complete.
Painted faded quarter panel vents with Wurth satin black trim paint.
7044270443
Painted my original faded 1/4 vents recently and used Wurth satin black trim paint. This was suggested over SEM by my the owner of the body shop I use. He advised it lasts longer and is more durable...
This is what I experienced with Raptor in a different application. It seems Line-X has less coarse finish which is why I am leaning towards that. I will speak with my body guy regarding repainting...
I looked into Line-X, Rhino or Raptor for my trunk. I have dealers in my area for all 3. I think I may go with Line-X although it will most likely be done next year.
Here's a sample of Raptor found...
https://deloreanclubflorida.com/events/
What about the crash test car from 1980? I saw photos online years ago of that car - would it be the first crash tested car?
Is the show in Clewiston? Will you be attending the tech day in Lauderdale in April?
Anyone try this: https://www.deloreango.com/us/courtesy-light-luggage-compartment-led.html
That or Amazon/eBay options - they may have a tighter fit.
I wouldn't be able to resist a photo either! Well done sir. :thumbup:
Yes. I recently replaced my original hinges and I put a tiny bit of PB blaster on the threads. The nuts came off no problem. Another tip: Reinstalling the plastic rear board with the dome light in...
Idle ECU, dwell meter, sway bar brackets still available.
I second that. Forget the original and get the Eagle starter. Higher torque, smaller size, lighter weight, and reman warranty depending on the vendor.
Good time to upgrade the hood intrusion brackets.
70388
https://www.amazon.com/dp/B000I1QHA8/?coliid=I1Z5NC0CTFMGD&colid=209TTRLVTHPVN&ref_=list_c_wl_lv_ov_lig_dp_it&th=1
I concur.
Get rid of them. I would never run 10+ year old rubber on any of my vehicles.
:smashfreak:
Same as Dave - when I'm not using 3M pads I use the BKF liquid on a cotton rag on wet panels then rinse.