Search:

I use this flasher purchased from Amazon with no problems: https://www.amazon.com/gp/product/B00XAU66V4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Well done, sir.

I recently installed a set of DPNW LED headlights after reading about them on the forum, and they are superb. I consider modern lighting an important safety item for our cars, so I think the DPNW...

I find that when bystanders ask "Whadya want for it?", they really mean "What's it worth?"

I tell people I have too much skin and blood in mine to figure out what it's really worth.

I always thought the Esquire series of gauges from Classic Instruments would look complement the dash.

34031

On the downside, they are fantastically expensive.

stainless

put me down for one set of the stainless

With respect to water pump replacement, I found that replacing all the rubber coolant hoses seemed to help the longevity of the water pump. Before replacement, I wore out the seals on two pumps,...

I have the stock DMC valve cover on the passenger side, so I am able to use the Stage I upper exhaust bracket.

I made a stainless heat shield that is a bit thicker than stock. So far no heat...

Same issue with my 3.0L and Stage I exhaust. The clearance between the heat shield and the serpentine belt tensioner is less than 1 cm at the upper fastener on the driver side.

The only way to...

interested. any idea what it'd cost?

interested.

Check for a fuel leak. Our old rubber fuel hoses do not take kindly to modern gasoline (which currently is about 6% ethanol in California, according to the interwebs).

http://www.youtube.com/watch?v=BD2kWCfTcaU&list=UUboZ9yWOrMHk3vJVGtCqszQ&index=7&feature=plcp

I discovered slop in the drivers side timing chain (but not the passenger side) that seemed to be causing a drivetrain clatter at higher rpm. I originally adjusted the valves to eliminate the...

Anyone have an idea what might be causing the engine "ticking" noise in the following video?

http://youtu.be/-enNUpue5HY

http://youtu.be/-enNUpue5HY

The noise initially appeared after I...

"After you get the nut off, the pulley should just slide off BUT make sure you take the pulley off with the key at 12 O'clock so it doesn't fall into the oil pan!!!!!"

What is the consequence of...

Although stainless steel bumper covers certainly would look cool, they would undeniably be impractical as they would be easily damaged and more difficult to repair.

Also, the inability of a...

Fencing ... you'll get the point soon enough.

Any chance you could catalog the steps into a how-to on the separation process?

carbon fiber unibody (i.e., delete steel chassis)
antilock brakes
five lug wheel hubs
carputer

I have the stainless dipstick tube from DMC Europe paired with a 3.0L and Stage I exhaust.

I was not aware that there are different styles of the tube.

Try mounting it to an exhaust stud.

Worked for me with a Stage I header in place.

Beautiful work. Is you aluminum pulley compatible with the 3.0L serpentine belts?

If so, I would be interested in a set.

Thanks, Mark. If we get a chance to meet, I will pick your brain about the charger.