You did a really good job!
Thank you for sharing your work.
Type: Posts; User: Domi
You did a really good job!
Thank you for sharing your work.
Yes, this is how I took the measurement.
I will try to put your boards back on the car to see how it works now.
I have cleaned all the main components, and was able to measure the voltage on the board.
The result is 11,6 volts.
For now, I don't put them back on place and keep going with the old board.
I...
Ron,
Thank you very much for the leads.
First of all I will start to clean the connector above the break pedal. Then, I will clean/change the 20A fuse and connectors.
I do have a voltmeter, so I...
Hello Ron, yes it is the enhanced taillight board, not the sequencer board.
That's why I don't understand why the breaks are working with lights ON and not alone like before.
I guess it it was a...
By the way, I don't have the sequential tail light, but the normal one.
There is only one ground on this board, so it's really weird why it isn't working properly.
I have cleaned all the contact...
Thank you for your answer.
Everything was working fine since 2 years.
So, I guess a bad ground could be the problem, but why on both boards at the same time.
I'll try to put back my PJ Grady's...
Hello all,
About 2 years ago, I installed the Drayron board (see previous page)
I have a little problem with it.
When I hit the breaks, my light doesn't lit up, sometimes a little bit ans...
Really cool product.
Amazing project, congrats!
Thanks guys :thankyou:
MOT passed this week with success, pretty happy :)
6698766988
And a little ride:
6698966990
Beautiful pictures, thank you very much for sharing :)
Beautiful pictures, thank you for sharing :)
Thanks :thankyou:
Powder coating of the rims, bringing it closer to the original color, in any case much better than the black paint done before:
6602166022
Really nice song & clip :thumbup:
Sorry to read this, rip Mike :(
Very good job, congratulation :)
Really nice board!
Hi Collie and welcome to the forum.
It's great to have you here, everyone will be happy and interested to read your story.
If you have some old photos to share with us, this will be awesome!
A better visibility in the dark, because now, all the 3 red square are lighted instead of one.
You can see a video on his website:
https://drayron.com/product/drayron-tail-light-board-set/
Today, I replaced the old connector of the tail light, replaced the license plate light, and new Drayron board.
A few pictures of the result, pretty happy with it....
Welcome here, and congratulation on your purchase :)
Good luck for the next step on the car.
Looking really beautiful :thumbup: