http://www.corvette7.com/forums/group.php?do=discuss&discussionid=823&pp=15
I have ride tones in my camaro - makes transformers sounds similar to the link above, if you can find the modult its...
Type: Posts; User: nwotank
http://www.corvette7.com/forums/group.php?do=discuss&discussionid=823&pp=15
I have ride tones in my camaro - makes transformers sounds similar to the link above, if you can find the modult its...
Thank you for this detailed explanation I value safety over saving money
Why are they destined to fail? Just curious because I was considering doing an upgrade to them soon. I've bought many parts from Hervey and have had pretty good luck. He's answered tons of questions...
So I've ordered a new fuel pump to see if thats the issue with my car dying upon acceleration, but I read someone had a similar issue with the ignition coil. My mechanic says once the car starts up,...
Yes, actually I've got that and the Volvo book as well, both are pretty good resources. Its a frustrating issue to nail down because everything works well as long as its parked.
I haven't replaced the pump in a few years, it seems to test out alright though as far as providing fuel pressure while its in idle. Was yours testing out well also?
Thank you for the information, a lot easier to understand than the 200 page Bosch book, I appreciate any suggestions as my car has been in the shop since Sept.
Yes the problem does show up in reverse, I got stuck a few times trying to reverse out of a driveway, when I gave it gas it would die.
There's not a lot of mechanics with knowledge about this fuel system and car in my area, in fact most of them refused to work on it, plus i'm just trying to get my car fixed so whatever I can do to...
Yep its automatic, it revs up just fine in neutral, trying to figure out what the fuel pressure is supposed to be at the fuel injectors because it seems fine from the fuel pump.
I'm trying to diagnose on my Delorean with my mechanic, does anyone know what the fuel pressure is supposed to read at the Injector?
My car dies when its put into gear, acts as though its running...
http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/AKcAAOxyVaBS87xr/$_57.JPG
So I purchased this lettering from an ebay seller, just wanted to see if some of you had a good idea on where to apply this...
No actually it was on full Cool, the knob won't actually move to the heat side, it will click on full Cool and move a little back but not much.
It was about 65 out when I took the video, San Antonio TX, but to clarify I had the setting to Normal AC when I took the video, not to heat.
1. Yes, ac works and I do get air through the dash and vents in normal and max. However, between these two settings I really can't tell much of a difference. When its set to max it does hiss on and...
My ac seems to work, although I can't really tell any difference between normal and max, it never really gets very cold but does get colder than outside temp, i tried the heater recently and even...
Finished up steering wheel with DMC logo
http://gvmpl.us/x129
THank you, sounds like i have to purchase the air bleeder kit then.
I was going through my car and I noticed what appears to me a place missing a hose, not sure if it is necessary or what it is supposed to be connected to. I have an automatic. Any thoughts?
...
thanks for your responses, mine is automatic, I'll have to check my reverse lights as I hadn't noticed anything out of the ordinary concerning my lights before
http://gvmpl.us/sxd2
Is this wire to the left of the hose number 11 supposed to be disconnected? I've been having a cold start issue and I noticed it was not connected to anything.
...
Thanks, yes its custom made, its just a piece of plexi cut out to the shape of the lights held on by velcro, although that might change unless i find better glue
Installed New wheels and light cover
http://gvmpl.us/ynq4
http://gvmpl.us/x7yg
http://gvmpl.us/9dqw
I was wanting to install a double din but didn't want to go through the trouble of reconfiguring the ac system so I found a 5" screen that hangs down a bit. Works well, and doesn't cover my ac vents....
if and when you take the wrap off, will there by any damage?