"all"?! No no - not at all - not completely accurate information there. As an example the last UK order you placed that I know about was collected from here (in the UK) yesterday and is in the USA...
Type: Posts; User: DeLoreanGo Arran
"all"?! No no - not at all - not completely accurate information there. As an example the last UK order you placed that I know about was collected from here (in the UK) yesterday and is in the USA...
The knuckles are all the same, as is the taper, the only difference is the threads. So yes, you'd just change the ball joint and all would be ok.
Just to correct you above. That is NOT a British made ball joint in your photo - that is the DeLorean Europe one. The DeLorean Europe upper and lower ball joints use a metric M12 (12mm) thread. The...
Yes it is :)
A rubber grommet would work if it has a perfectly tight seal.... I have never been able to find the correct size, but we do still have a few NOS ones in stock - just sadly a little on the pricey...
If by "round ends" you mean the "feature" that is in the smaller of two red circles, this, in all 8 cases, is nearest the floor/road/pavement.
You realise that pictures 3/4 (the right side) the...
Here are some pictures showing the 4 pieces (i.e. LF LR, RF, RR), plus a further photo with 2 red circles showing the 2 places to look to work out which is which.
6396263963639646396563966
This looks exactly the same as an email I replied to this morning.... The "new way" of doing the fronts, is to do them the same as the rears have always been. So you already have the "new style" rear...
There is a detailed guide here: http://www.deloreaneurotec.uk/viewtopic.php?f=19&t=6118
I have emailed you this too.
Hi Rich,
Plenty in stock: https://www.deloreango.com/us/ignition-lock-bezel.html
Just to try and clear up some inaccuracies in this post..... The bolts that we sell (and Ed at DeLorean Europe sells) are proper cylinder head bolts, made by one of the best, if not the best,...
We do a Delrin version too - https://www.deloreango.com/us/delorean-steering-column-bushing.html - Delrin being similar to PEEK in how it would function in this application, and designed to last a...
Confirming these are all back in stock now :)
Yes, all of the first batch of these has sold already/been shipped, but you can still order them on the website and if you order now and it will be shipped in a week from now, or as soon as they are...
Here you go :)
61286
We've had these made now (in tough Delrin plastic): https://www.deloreango.com/us/steering-column-cage-bushing.html
61230
PETG plastic.
LH / Drivers side: https://www.deloreango.com/us/lh-mirror-access-panel.html
RH side: https://www.deloreango.com/us/rh-mirror-access-panel.html
I have a hundred of them - or at least I will have.... I've not taken delivery yet, but should be with me and listed on the site at the end of the week.
No - the ones in your link are the “DeLorean Europe” ones, which we also sell of course, on that link. If you look at the unrippled black version of those (link at bottom of page) you’ll see...
Assuming you are talking about the "original material" ones we sell. They, erm, look like the originals. There are some photos on the listing on the website. But here are a few too.
60974
60975...
The cap is 1357776 - which is the correct 15lb / 1 bar one. Obviously you don't want the 1.5 bar one. Colours do vary, but generally it is white, yes - some aftermarket ones are black, I think some...
I do, but it isn't suitable for pressurised systems.
Over here there a few people using a Volvo plastic tank, Volvo part 1276040 (replaced by 3547466 ). This requires no drilling as the bracket...
Ron, it just depends on what you order - size/weight etc., so it will go on the most appropriate service for "free", but with a varying price paid (and subsidised) upgrade should you need to ensure...
I would have to agree with Chris ;)
They don't look familiar to me, or match any of the photos on the usual websites, assuming you mean a DeLorean specialist vendor.
Have you seen the 1000s of...