Looking for a copy of the file where it has the image of the time machine parts where you would take out the rear side Windows?
Type: Posts; User: Kenthegreat
Looking for a copy of the file where it has the image of the time machine parts where you would take out the rear side Windows?
I saw this picture for the rear quarter glass ( time machine parts sticker) and someone said the file for this is here on DMC talk? Anybody know where is or can give me the file?
Thanks
How would I added more spring pressure? has anyone ever added a spring for this that worked? Like a long spring for a carburetor?
I replaced the spring on the throttle spool, not the throttle body. Like you said when I press on the lever, its Like the springs don't have enough to force the screw down against the throttle...
I'm having an issue with my idle, every now and then the idle get stuck at 1200-1400 rpm. I found if you press the lever for the idle screw"in" the idle speed drops to normal, I've cleaned and...
Any chance you can get one of the under side spring too?
Can someone please post a photo(s) of the throttle spool that shows how the springs are suppose to be installed, my throttle is binding somewhere and I need to see another to compare. thanks.
So I got 0.5 k ohms on the secondary coil and 9.04k ohms on the primary. According to a few web sites I got a weak coil.
So I'm getting a 3.5 k ohm at the idle ecu, and the the screw is depressing the micro switch.
I took the car for a long drive today, it started to run really bad, stalled a few times. I had my...
The three wires that I have are black with green, black with pink (ish) and black with red. I replaced the wiring harness about a year ago, it was in very poor condition
After going thru everything I finally found it, one wire for the frequency valve was getting pressed back into the connector, so I got it set to 45, and yes when I hit the WOT switch it goes to 55-58...
My multi meter has a duty cycle setting and that's what I used, what would cause the frequency valve to stop working other than a failed frequency valve?
I don't have a diagnostic plug, I have a connector that has the orange wire. So I tried using the meter that I borrowed and I could get any reading? Not sure if it works. So I used a multimeter to...
I don't have the diagnostic plug on my car! Still the video is great
QUOTE=Jonathan;174791]I saw this while looking not long ago:
https://www.youtube.com/watch?v=cpNB1eRktzM
Not something...
My Delorean is running rich and I want to check the dwell, I borrowed a dwell meter and just wondering where is the best location to hook it up to? The meter has a red, black and an induction...
I'm looking for the video camera used by Marty McFly, working or not. Please contact me if you have one for sale.
I'm looking for a Back to the Future pinball machine, manufactured by Data East. Please contact me if you or someone you know is looking to sell.
I have 2 Nose bras for sale,
The first is a LeBra with "Delorean" pressed into the front of the material, this is is great condition dosen't look like it was ever installed on a car, asking $125.00...
Both hoods and the Nose bra are sold. Everything else still for sale.
I have 1 used rear glass with defrost, new its worth $331. Asking $75 plus cost of shipping.
Part is located in Calgary, Alberta, Canada
Here are some pics of the 4 wheels I have for sale, again its 1 rear wheel that is damaged.
For sale
I have 2 damaged hoods, 1 flat asking $150.00 OBO and the other grooved $150.00 OBO, please see the pics for more info
1 damaged rear right quarter panel with glass, see pics for more...
This is 11617, and it's a manual tranny. I will check the starter wiring tonight. I also installed a new engine harness. So possibly a bad connection somewhere.
Every now and then my engine will not crank over, and other times it cranks over normally. When it acts up it's like the battery is dead. I have a new battery, starter, gound wire(s), alternator. ...
What about winter specials?