Search:

I'm installing new carpet this week and noticed this issue. My plan was do do something similar to your friend's fix, but instead of hooking the clip over the outside of the flap, I plan to cut a...

Lysol may mask it, but if you really want to rule out the foam I'd suggest just replacing it. You could probably find a roll of closed-cell foam like that at a packing/shipping retailer, or make your...

Have you checked to see if condensation from the evaporator line may be leaking onto your passenger side carpet? That's another culprit for creating old mildew smells.

I cleaned mine a few weeks ago - Simple Green and shop rags had them as good as new, but I added a coat of metallic paint just to see how it would look.

6388163882

Last week I finished most of my winter work - new spax adjustable shocks, springs, link and control arm bushings, trailing arm bolt kit and new TAB bushings, upper and lower ball joints, tie rod...

I used to have engine whine and the same popping issue when the compressor clicked on. I added a ground loop isolator that solved both problems.

I just rebuilt my parking brake last week and this happened when I was putting it back together. If I hadn't just had it apart, I would've thought the nut was loose too, but it's likely just swiveled...

I have one of these and if I recall correctly it barely takes any motion at all to activate it. There are several free interval timer apps that you can customize to vibrate every X seconds. Maybe you...

We have a winner - it's the flywheel inspection plate. I looked right over it on the part diagrams. Thanks!

A few weeks ago I drove my car to a club meeting a friend invited me to. I have a lowered suspension and somewhere along the route I bottomed out on a dip in the road I didn't see. A few days later I...

My speedometer is in need of calibration and to avoid the hassle I bought a replica BTTF digital speedometer I found on eBay that uses a quick refresh GPS. It has a dimmer switch for night driving,...

I went through all these same steps once and ultimately found a hairline crack in the ceramic of one of my plugs. By hairline I mean I never would have spotted it if I hadn’t been looking for it...

Glue would probably be the easiest thing to try, maybe with some splint-like supports added. I wouldn't mind trying to model one for 3d printing. If I recall it's not that complex of a part. Do you...

I recommend pulling the outer seals and making sure that there isn't any excess cloth material folded over the top of the sills that would wick up water and cause future stains. Your car could be...

"Yeah it's right there. Just flip the switch to turn it on, but make sure your arms and legs are inside the vehicle or it'll get real messy."

6024060241

After 2 years of ownership I'm still...

This video is an extension of this commercial.



https://youtu.be/yYWEX0FyApo

Just ran across this while flipping through this thread. Atlas was the first album I played in my Delorean the day I got it 2 years ago! It’s still perfect music for late afternoon cruises. Great...

I just installed a new steering column bushing last night, so I’ve been reading a lot about this issue. I haven’t reinstalled the steering column yet but I’ll probably get to it tomorrow. I...

Installed a stock steering wheel. My car had an aftermarket racing wheel when I bought it and I switched it to one of the knock off Momo wheels shortly after. The smaller wheel really made it feel...

I had the rear shelf cover off today to check a fuse and noticed something i couldn't identify. It's always been kind of a mess under there, but I've never had any real electrical issues. There are a...

I just finished the same job on my rear calipers and starting the front tomorrow. Mine looked exactly the same as yours. I noticed last week that stopping didn't feel guaranteed anymore so I was...

Slightly off topic, but has anyone noticed these are $700 on amazon now? Seems like mine was about $250 18 months ago. At this rate, a flux capacitor looks like a significant value-add for the car :)

If you can’t find a good way to punch speaker holes, or if you try and it doesn’t look as good as you’d like, you might consider some cheap speaker grills from amazon. They have some low...

All done and back together. A friend offered to help with welding the crack. Ticking sound is gone and definite improvement in power! I'm super-happy with the results.

I modeled a button to rebuild mine a few months ago.

https://www.tinkercad.com/things/3n496SCnHBz

You can 3D print it but you're on your own for the electronics. I pulled an LED and button from...