Search:

Thanks for the tip Luke. That's unfortunate.

Also thanks for the shirt compliment. :) We plan to replenish soon.

Hi There,

I think that should be possible. If you can provide your address in a Private Message, I'll have our store administrator confirm and get a mailing quote.

Regards,
Dana

Hi Mark, It worked for me. There was adequate clearance, at least for my completely stock set up.

http://dmctalk.org/attachment.php?attachmentid=59144&d=1548960083

Hello there,

Our new club T-shirts and a limited edition 40th anniversary patch are now available on our new website store.

65957

65958


Here is the Facebook post.

Yes, RIP - Mr. Weitzman

There was a lot of coverage for DeLorean's trial in that article.

Hello and welcome!

For reference, here is a picture of the original Paris-Rhone starter (assuming that is the one your car still has):
...

DMC has them for $69. https://store.delorean.com/102143-water-pump-pulley.html

I'm not sure why you want Hervey's, but as I recall, his parts had problems with the pulleys coming off, plus the...

I saw these grounding straps when I refurbished my car, especially the windshield surround and the front fender area.

http://dmctalk.org/attachment.php?attachmentid=46803&d=1477098898

A couple...

You're welcome. I used red loctite on the nut.

You're welcome, and no worries. It's been a nightmarish year that's for sure. But take heart, spring is just around the corner..
http://dmctalk.org/attachment.php?attachmentid=65779&d=1615610902
:)

Thanks Henrik!

I checked my car and I saw 2 timing marks on the pulley as follows:

The deeper one (also pictured above):
http://dmctalk.org/attachment.php?attachmentid=65766&d=1615515091


The smaller one...

Hi Jonathan,

I believe those cuts are normal. They are timing marks, one main cut and a shallower cut in another area as I recall. Here is my re-plated pulley where you can see the deeper cut...

Likewise. 👍

Excellent. A new pulley is even better. I'll defer to others whether putting the transmission in Park is enough/advisable.

Hello DCF members and other DeLorean enthusiasts:

We're excited to announce that the DeLorean Club of Florida is launching a brand new merch line! Our first product will be club T-shirts.

We...

Jonathan,

To expand on David's T's suggestion, can you try to bend out the pushed in section with a vise? You can protect the pulley with one paint stirrer or soft flat metal stock on each side of...

Sounds great. Thanks Lenny!

I was going to recommend Interstate as I'm still running the battery that Tony installed before I bought the car in August 2013, as it's approaching 8 years reliable service, but after the feedback...

This is great advice so far, but you can also try lifting the door handle enough the release the latch, while simultaneously pressing down on the front latch area, then the rear latch area, and if...

Unfortunately, these stories are all too common. I could tell you stories going back decades. When I have to go into a dealership/auto repair shop, I am typically dressed like an office worker....

Hi Chris, glad to see your posts again. Do you still have the KITT project?

You as well Dan.

By the way, I should give a status update:

At this time, which is 3 plus years since the refurb, this 40 year old system is still keeping the car cool. No top ups were necessary in the meantime.

Thanks!