Search:

Another option:

https://www.deloreango.com/uk/rear-light-cluster-led-bulb-kit-pair.html

You don't need to buy the complete set,

Andy

Hi guys, sorry, off topic but for info, I note that the legendary Dunmurry Motor Company now has


https://www.deloreango.com/uk/inconel-trailing-arm-bolts.html

Andy

Thanks David,

Thats a bit short sighted in the design, isn't it? As there is no way to know when you bulb fails... it just doesn't light up-

1) do you have plenty of fuel, or
2) has you...

Hi,

My fuel light in the binnacle lights when I jumper the appropriate contacts at the sender, but not when I turn the ignition on,

Should it light at key position 2 with the oil brake and...

Unsure why I never posted this, but a couple of years ago, in a really rural part of Scotland, myself and a mate stopped for a pub lunch. Afterwards, a couple of stoners who had also been in, but...

Here is a uk solution

41036


http://www.deloreaneurotec.uk/viewtopic.php?f=20&t=3392#p44871

Andy

I have just fitted these.

Perfect.

No issues at all. I took it to be aligned afterwards. It was aligned about 1000 miles previously. With new arms, it didn't even need any adjustment.
...

Today I fitted jewellery
39610

Not as pretty fitted!
39609

Thanks dave/julee/mike/suzy!

I think I had a lucky escape!
39611

That would explain it...

37954

Hi

I noticed this on my car last night. I had already had a mammoth fixing session, and just as I was putting it in the garage, I noticed this.

I will check my bushes, LCA's etc this evening. ...

Make sure this is free, lubed and installed correctly (ie. phased)

As per

36165

I would be tempted to jack the front up, turn the steering wheel and check for resistance. (Sorry, I see you...

This is not at all accurate, in my opinion.

>> Generally cars above £20,000 are lower-mileage timewarp examples,

Not so. Timewarp examples are here-->
...

I just got vin814 back on the road this weekend.

One of many things I did was fit mark's clock.

I like it. Apparently its not perfect, but what part of the DeLorean IS perfect?! Its also not...

This may help mate?

http://www.deloreaneurotec.uk/viewtopic.php?f=22&t=2658

andy

well, I guess it's kind of true!

A

Hi Rob,

I am planning to go with brass nuts. Should I be using lock washers on the manifold and the bolt-together sections of the (UK stainless) exhaust?

Thanks in advance!

andy

Thanks David,

I agree, I dont want to replace it just because I can, but I do notice rather a lot of ally corrosion is evident, plenty of paint flaking off, it has clearly had a few knocks, and...

Hi, I have done this recently, using Ed's DMC EU rad and fans.

At the same time, a full front and rear suspension rebuild. And clutch, yada yada.

so I will obviously have 4 wheel alignment...

Discussed here on eurotec
http://www.deloreaneurotec.co.uk/forum/viewtopic.php?f=25&t=4491&hilit=cleaning+connectors

Further to this, I asked ed Uding. He said they always use gl5 as per Renault's recommendation.

After a lot of hand wringing, I decided to buy:

Fuchs TITAN GEAR SYN 75W-90 Semi Synthetic...

Appetite for Destruction on tape about 1991.

Still one of my favourite albums.

Great stuff! As I say, I haven't seen mine, but gut feeling says yes, new sleeves too...

Are everyone else's still okay? If so, I will presume mine are too.

Thanks tom,

Andy

I'm probably up for a full set Tom.

Although I haven't checked my existing ones, but as the box is out, why not?!

Will keep an eye on this thread.

Cheers,

Andy

It rocks. As do you, well done on 2+ years of work. Congrats!

a

Superb! From beginning, right to the end! :biggrin: See you there!

andy