FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Recall Notice, FAN RELAY
I was making a software change to filter the input signal because some cars seem to have noise on that line even when you turn the engine off, the fans keep running. Well I put that software change into one unit and will send that unit off to see if it fixes that problem in that car.
Anyway, I ran across a software bug that could cause the fans not to go on. It's a rare occurrence but I don't want anyone to have that problem. So I recommend you remove my solid state fan relay (painted brown) and use a standard mechanical relay until you send the solid state one back for a software update.
The problem can happen when one signal (the AC or otterstat) turns off and the other one turns on within 1 or 2 seconds of the first one turning off.
Sorry about this inconvenience.
-
"Former Delorean owning Guru"
Dave, could this be causing the periodic flashing of the fan fail light (near continuous blinking, but comes and goes as to when). The fans have been confirmed to be working fine even when this happens. I have both of your fan modules.....
-
Senior Member
Originally Posted by
Spittybug
Dave, could this be causing the periodic flashing of the fan fail light (near continuous blinking, but comes and goes as to when). The fans have been confirmed to be working fine even when this happens. I have both of your fan modules.....
No that would not affect the fan fail flashing. What REV is marked on your fan fail unit (if any).
-
Senior Member
Dave, my fans keep running for 20 seconds when I turn my car off, figured it was normal since the module is designed to keep powering the fans if the relay loses power in some way and I wasn't sure if it had a way to know if the car was off. Is this what you're talking about, or something else?
Originally Posted by
Spittybug
Dave, could this be causing the periodic flashing of the fan fail light (near continuous blinking, but comes and goes as to when). The fans have been confirmed to be working fine even when this happens. I have both of your fan modules.....
I've got them both as well. My fan fail light also had a sporadic blink, but then I cleaned the grounds for the fans and it went away. The light is designed to come on if there's some percentage of discrepancy between the two fans in the amount of amps they're drawing, it could be yours are right near that line.
-
Senior Member
Originally Posted by
Kevin
Dave, my fans keep running for 20 seconds when I turn my car off, figured it was normal since the module is designed to keep powering the fans if the relay loses power in some way and I wasn't sure if it had a way to know if the car was off. Is this what you're talking about, or something else?
I've got them both as well. My fan fail light also had a sporadic blink, but then I cleaned the grounds for the fans and it went away. The light is designed to come on if there's some percentage of discrepancy between the two fans in the amount of amps they're drawing, it could be yours are right near that line.
No the 20 seconds running is normal if the fans were running when you shut the car off. What one or two owners have found was it would run past that 20 seconds. It must be a noise caused by the fans or wiring that re triggers the relay input.
-
Senior Member
Originally Posted by
Bitsyncmaster
No the 20 seconds running is normal if the fans were running when you shut the car off. What one or two owners have found was it would run past that 20 seconds. It must be a noise caused by the fans or wiring that re triggers the relay input.
Oh ok, I haven't experienced that, but I'll send it up for the other bug. Can you PM me the address to mail to?
-
Senior Member
I noticed that my Fan Fail light is on when the car has been shut off and the fans run for the 20 seconds you programmed. I also have both solid state relays.
But it never comes on when driving. The fans start fine and the car keeps its cool. Is this supposed to light the light?
- Volker Seidel -
The way I see it, if you're gonna drive around in a car, why not do it with some style?
-
Senior Member
Originally Posted by
vps3922
I noticed that my Fan Fail light is on when the car has been shut off and the fans run for the 20 seconds you programmed. I also have both solid state relays.
But it never comes on when driving. The fans start fine and the car keeps its cool. Is this supposed to light the light?
It's not normal but probably one of your fans has higher or lower current than the other fan when your battery voltage is low (engine off). I would not worry about that unless you see it when driving.
-
Aussie Member
Is there a way we can apply this update ourselves?
Sending internationally is a royal pain in the...
-
Senior Member
Originally Posted by
Bitsyncmaster
It's not normal but probably one of your fans has higher or lower current than the other fan when your battery voltage is low (engine off). I would not worry about that unless you see it when driving.
I kept an eye on that when driving around today. It was quite hot today. The car kept its cool and the fans were working fine. I noticed that the fan fail light is coming on when the car is not in movement. It stayed off when the car was on the highway but came on when I stopped at a traffic light (engine still running). I stopped it in the garage and the light came on again. Initially flashing and then solid on. It stayed on for the 20 seconds after the engine was turned off and went off after that. I had a stopover at my friend Dave's and he checked with me the fans and they both came on and were working fine. I also checked the fuses in your fan module and they are both fine.
I am not sure what is going on.
- Volker Seidel -
The way I see it, if you're gonna drive around in a car, why not do it with some style?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules