Glad that mystery was solved
"The more they overthink the plumbing, the easier it is to stop up the drain."
Location: Sunfield, Michigan, USA
Posts: 2,444
My VIN: 1798
Glad that mystery was solved
"The more they overthink the plumbing, the easier it is to stop up the drain."
When the cruse control is ON it's about the same brightness as the middle running light. When CC is turn OFF, (I've had to check this in Full dark), it's Very dim. Just enough to see that it's on.
Where would I add the resistor?Originally Posted by Bitsyncmaster
The weird lights are not a problem except, My CC doesn't work at all. I'm guessing that when CC is turned on, it's reading that my brakes are on so it won't activate/set cruse.
No, I still haven't tried all combinations of bulbs and boards yet. (I have checked fuses).
George
George.
1974 BMW RS90 motorcycle
1981 DeLorean. Cruise Control, Wings-A-Loft, Eibach springs, Spax shocks, Stage1 exhaust, Manual, Grey and Grooved, LED clock and fixed pulls.
1993 del Sol S (With a Few, Upgrades)
2017 Chrysler Pacifica Limited
Dave M vin 03572
http://dm-eng.weebly.com/