Page 24 of 24 FirstFirst ... 14 22 23 24
Results 231 to 240 of 240

Thread: VIN 16951 from France

  1. #231
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    The fuse blows only when the jumper for the light is on (new switches from DMCH bought a long time ago)
    DSCN4133.JPG
    Without the jumper, the switches are working perfectly, weird?
    Maybe there is a mistake on the drawing?

  2. #232
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    Found the answer by testing one switch after another.
    One switch works properly, and the other one don't.
    Once the jumper is in place the fuse blown. I bought them in 2015 from DMCH (installed now), so I guess the warranty is expired ????
    DSCN4141.JPG
    Next:
    DSCN4134.JPGDSCN4135.JPGDSCN4136.JPGDSCN4137.JPGDSCN4138.JPGDSCN4139.JPG

  3. #233

  4. #234
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    I'd like to remove the doors panels, but I can't?
    Any ideas how to disassemble it please?
    DSCN4162.JPGDSCN4163.JPGDSCN4164.JPG

  5. #235
    Stupid Newbie DaraSue's Avatar
    Join Date:  Jul 2016

    Location:  The LC

    Posts:    420

    My VIN:    10907

    When I had to reseat my drop glass, I found these threads helpful.

    http://dmctalk.org/showthread.php?31...or-Door-Panels
    http://dmctalk.org/showthread.php?72...dow-drop-glass

    The 2nd one has videos that go through how to take the panels off as well. I remember finding it kind of tricky to get the escutcheon out, and then get the bolts back in under it when I was done, but I can't remember exactly what I did that finally worked, sorry...

    (I think I had to put the bolts back in by sticking them in the socket wrench and putting them in upside down with the door up. The video talked about some way to do it with a special kind of tape (double-stick?) that probably would have been easier than what I did...)
    Last edited by DaraSue; Yesterday at 12:10 PM.

  6. #236
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    Thanks for the link, appreciated
    Success, thanks to Raphael on the French forum for his advice
    DSCN4167.JPG

  7. #237
    Stupid Newbie DaraSue's Avatar
    Join Date:  Jul 2016

    Location:  The LC

    Posts:    420

    My VIN:    10907

    Quote Originally Posted by Domi View Post
    Thanks for the link, appreciated
    Success, thanks to Raphael on the French forum for his advice
    DSCN4167.JPG
    You're welcome, glad it worked out!

  8. #238
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)


  9. #239
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)


  10. #240
    Senior Member Domi's Avatar
    Join Date:  May 2011

    Location:  France

    Posts:    2,184

    My VIN:    16951

    Club(s):   (DCO) (DOA) (DCUK)

    New carpet on the doors
    DSCN4173.JPGDSCN4172.JPG
    While the glue is drying, I'm replacing the glass on the passenger side. (the driver's side doesn't move for now)
    DSCN4174.JPGDSCN4175.JPGDSCN4176.JPG
    Back in place

    DSCN4177.JPGDSCN4178.JPG

Page 24 of 24 FirstFirst ... 14 22 23 24

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •