VIN 16951 from France

[Domi]

New wire, longer and bigger from the starter to the alternator
DSCN3380.jpg
New silicone pipe to the stainless pipe
DSCN3382.jpg
Put all the red silicone vacuum line in place
DSCN3384.jpgDSCN3385.jpg
I wonder how you tight this part? Do I need a special tool? Thanks!
DSCN3386.jpg

[Domi]

Old fuel line from the frequency valve removed
DSCN3387.JPG
New stainless fuel line, let’s hope everything is okay with the clamp
DSCN3388.JPG
Go back into the engine compartment
DSCN3389.JPG

[Domi]

Replace those clamps
DSCN3390.JPGDSCN3391.JPG

[Domi]

Water pump is back into the engine compartment
DSCN3392.JPGDSCN3393.JPG
New belt and screw
DSCN3394.JPG
Only one pipe on two, such a pain to put them back. I thought silicone pipes were easier to mount, but no...
DSCN3395.JPG

[DMCMW Dave]

Replace those clamps
DSCN3390.JPGDSCN3391.JPG

Good idea.

[Domi]

Thanks Dave
A little job this morning
All silicone pipes are good in the engine compartment
DSCN3396.JPGDSCN3397.JPG
New electrical terminals
DSCN3399.JPG
Cleaning and new seals
DSCN3400.JPG
New stainless bracket
DSCN3401.JPG

[Domi]

Job of the afternoon
DSCN3406.JPGDSCN3407.JPGDSCN3408.JPGDSCN3410.JPG

[Domi]

New stainless bracket from Josh
DSCN3413.jpg
Just clean this part, I didn't want to disassemble everything
DSCN3414.JPG

[Domi]

New rod assy throttle in stainless
DSCN3418.JPGDSCN3419.JPGDSCN3421.JPGDSCN3422.JPGDSCN3423.JPG

[Domi]

Disassembly of the kjet to clean it up and change some parts
DSCN3425.JPGDSCN3426.JPGDSCN3432.JPGDSCN3434.JPG
For some of you whom already did it, did you put some glue like this on the new gasket?
DSCN3435.JPG