Assembly
DSCN3495.JPGDSCN3498.JPG
And removing old rusty rock screen
DSCN3499.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Assembly
DSCN3495.JPGDSCN3498.JPG
And removing old rusty rock screen
DSCN3499.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Just did a little painting on the bracket
DSCN3500.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Finally removed the old stereo unit
DSCN3503.JPGDSCN3504.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
New spire nut
DSCN3505.JPG
POR15
DSCN3506.JPG
And POR15 everywhere to avoid rust in the future
DSCN3508.JPGDSCN3510.JPGDSCN3511.JPG
New rock screen
DSCN3512.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Second layer of POR15
DSCN3513.JPG
And add a new ground to the ECU
DSCN3514.JPGDSCN3515.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Painting... again :mrgreen:
DSCN3516.jpgDSCN3517.jpg
I had to remove POR15 on the bracket because it didn't hold on. So, now I wonder if I try to paint it black or invisible paint to protect it like it is now.
DSCN3519.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
Just changed the ground wire from the battery
DSCN3522.JPG
The old one was rusty
DSCN3523.JPG
Finally painted black anti rust
DSCN3524.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
The radiator and fans and back on the car, not so easy lying under the car
Replacing the bracket, new horns with stainless bracket and also stainless bracket for the radiator.
DSCN3526.JPGDSCN3527.JPGDSCN3529.JPGDSCN3530.JPGDSCN3531.JPGDSCN3532.JPG
I’m trying to mount the radiator duck, but not so easy to do it. On side only is okay for now.
DSCN3534.JPGDSCN3535.JPG
When you take a look on Ed’s site or Houston it’s a two part component now?
We’ll see that tomorrow, after 4 hours of working on the car, I’m a little bit tired.
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
After a few hours, the radiator duct is finally mounted back.
DSCN3537.JPGDSCN3538.JPGDSCN3539.JPGDSCN3540.JPG
And the last stainless pipes are now back in place
DSCN3541.JPGDSCN3542.JPGDSCN3543.JPG
Location: France
Posts: 2,457
My VIN: 16951
Club(s): (DCO) (DOA) (DCUK)
I wanted to redo the level of clutch fluid today and despite the valve is operating, nothing comes out?
Without the valve, the liquid reaches well, so I assume that the valve is defective.
I do not know if I can find it here or if John can provide me another in exchange.
DSCN3544.JPGDSCN3545.jpg
Otherwise, I installed my new gas line, which should prevent leaks at the filter.
DSCN3549.JPGDSCN3550.JPGDSCN3552.JPG