VIN 16951 from France

[Domi]

POR15
DSCN3686.JPGDSCN3688.JPGDSCN3689.JPG
New boot
DSCN3690.jpgDSCN3694.jpgDSCN3695.JPG

[Chris 16409]

New fuel pump to replace the old one (21 years old)
Attachment 42092

Hey Domi, I would recommend you get this plug for the pump:

http://www.rockauto.com/en/moreinfo....nid=513&jpid=1

I didn't really like the one that was provided. There is also an AC Delco branded one as well:

http://www.rockauto.com/en/moreinfo....340894&jsn=233

Just a point to remember, the vendor who sold you the pump bends the pump connector pins out slightly to accommodate his plug. You will need to bend them back so the correct plug fits like it should.

[Domi]

All right, thanks for the advice

[Domi]

Lower and upper arm on the frame
DSCN3699.JPGDSCN3700.JPG

[Domi]

New isolator spring
DSCN3709.JPGDSCN3710.JPGDSCN3713.JPG
Front cut spring VS Eibach
DSCN3711.JPG
New Spax shocks & Eibach springs
DSCN3712.JPGDSCN3714.JPG
There is a gap with theses polybushing. Does anyone encounter that kind of problem?
DSCN3715.JPG

[Domi]

Next step:
DSCN3717.JPGDSCN3718.JPGDSCN3721.JPGDSCN3720.JPGDSCN3719.JPGDSCN3716.JPG

[Domi]

Next
DSCN3723.JPGDSCN3724.JPGDSCN3725.JPGDSCN3726.JPGDSCN3727.JPGDSCN3728.JPGDSCN3729.JPGDSCN3730.JPGDSCN3731.jpg

[Domi]

Let's work on the rear of the car
DSCN3739.JPGDSCN3750.JPGDSCN3749.JPGDSCN3748.JPGDSCN3747.JPGDSCN3746.JPGDSCN3745.JPGDSCN3744.JPGDSCN3743.JPGDSCN3742.JPGDSCN3741.JPGDSCN3740.JPG
Do I have to cut the clip to get back the rear spring platform?
DSCN3751.JPG

[Slammer]

You should be able to lift the platform right off, when the spring is out.

[Domi]

All right, thanks!