VIN 16951 from France

[Lwanmtr]

ok, I thought that might be...i just replaced the bulbs in mine with led..not the whole board.

[Domi]

The new Lambda relay is in position in the relay compartment, thanks again to Dave McKeen
IMG_9147.jpgIMG_9148.jpgIMG_9149.jpg
New step is to remove the old antenna which doesn’t work anymore.
The bracket needs to be refurbished with a new layer of black paint.
However, I don’t see on the electric drawing the polarity of the antenna’s wires?
Does anyone know the polarity please?
IMG_9150.jpgIMG_9151.jpgIMG_9152.jpgIMG_9154.jpg

[Domi]

The following:
IMG_9158.jpgIMG_9159.jpgIMG_9160.jpgIMG_9161.jpgIMG_9162.jpgIMG_9163.jpgIMG_9164.jpg

[Lwanmtr]

Yaay electrical work...can be a pain sometimes.

[Domi]

Yep, right

[Domi]

Little bonus that makes me happy, and easy installation
IMG_9165.jpgIMG_9166.jpgIMG_9167.jpgIMG_9168.jpg

[Lwanmtr]

Even the little easy things are cool to do.

[Domi]

Even the little easy things are cool to do.

Exactly

[Domi]

Installation of the antenna, it was necessary to modify the bottom of the support because the fixing and evacuation holes are not aligned.
Otherwise, for the moment impossible to make it work ...
The polarities are reversed when the ignition is on, and when the station is on.
For example /
White: Once negative once a positive
Yellow: Once positive once a negative
Brown: positive after contact
In short, it is to go crazy...
IMG_9174.jpgIMG_9173.jpgIMG_9175.jpgIMG_9176.jpg

[Lwanmtr]

My antenna doesnt work, but I havent decided if Ill replace it or not.