FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
One of those purists you keep hearing about.
PPR O-Rings
Gentlemen,
Sorry for the delay, work has been very busy.
David T - Yes I am SURE I clamped the correct line. I also tried clamping the return to see what would happen. The pressure jumped to 9 bar and I scared myself, so I didn't repeat it!
The vacuum test should confirm there is no tear in the diaphragm IIRC. If there is a tear, you'd only draw gasoline.
Thanks for the help everyone. Toby is sending up a new pump and some o rings.
Last edited by sdg3205; 09-12-2014 at 12:46 AM.
Dave
Here, somewhere.
-
Senior Member
Originally Posted by
sdg3205
David T - Yes I am SURE I clamped the correct line. I also tried clamping the return to see what would happen. The pressure jumped to 9 bar and I scared myself, so I didn't repeat it!
That 9 bar sure tested your accumulator. You only want to clamp that return line with rest pressure present.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules