louvers and radio, etc.

[cpistocco]

Alex wolf on the forum has the radio

Thanks for the info!
I will check out his ebay ad....
-Charlie

[Jonathan]

Hello
Thank You....Does the am / fm radio work?
How much are you asking? How does it look? scratches/marks?
-Charlie

Radio works. I have been meaning to set it up with temp power and speakers and test functions. My original speakers were shot once I got in there and looked at them, so a little misleading when trying to gauge how well the deck worked.

I'll post up either a video of it playing, if I can do that, or at least some photos showing condition of the deck itself, wiring on the back and front face. I haven't thought about what it is worth/selling for as I don't really know to be honest with you. Something fair for both if that makes sense. Might be able to determine that with help from others on this thread.

[kajcienski]

Hello
I would probably want one that is "finished".... Just out of curiosity, though, what are you asking?
Thanks
Charlie

Was hoping to get $450 ($850 new from vendor). It has been professionally repaired and surface prepped. Has the 2 small vents as well. You could either have it painted, or most just use SEM trim black.

[DMC-81]

Hello
Is the master cylinder all assembled? or in pieces (pictured)?
Thanks
Charlie

Hi Charlie,

The Brake Master Cylinder (BMC) is all assembled, but I have also included the other parts necessary to attach your plastic fluid reservior (which you clean and re-use), and to fasten the BMC to the brake booster.

[yellowmxwheels23]

I have an engine cover.
Pretty good shape. Still has the stickers attached to it.
Shoot me an offer.
Located in 91935

[cpistocco]

Hi Charlie,

The Brake Master Cylinder (BMC) is all assembled, but I have also included the other parts necessary to attach your plastic fluid reservior (which you clean and re-use), and to fasten the BMC to the brake booster.

Ok sounds good....
How do we make this happen?
-Charlie

[DMC-81]

Ok sounds good....
How do we make this happen?
-Charlie

Private Message (PM) sent. Thanks.

[cpistocco]

I have an engine cover.
Pretty good shape. Still has the stickers attached to it.
Shoot me an offer.
Located in 91935

Thank You. Where are you located?

[yellowmxwheels23]

Thank You. Where are you located?

San Diego

[dmruschell]

I have an Oct 81 Craig radio out of 5786 that I'm never going to use again. It played a cassette adaptor, so the electrics work, but I can't guarantee the mechanicals do (I had to cut out the original harness to install my new system, so I can't easily test now). The display is also not working. It is in very good cosmetic condition, though.