FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Guy with a DeLorean
Originally Posted by
Mike1830
Hi Mark,
Are you able to send me the correct part numbers/ dimensions of the zero boxes that were used all over the car. I have 3D models of them but would prefer not to 3D print them. Rather have the real deal if they still make them
Somewhere in this thread I thought I posted the PN list, but I can look up that info again and post it. They are still made by Zero in all the correct sizes as far as I know. I think the only difficult one to get was the VSR enclosure (Big box behind the passenger seat with the thumbwheel counter in it). That was a custom size blank and draw depth that can be made special to order. You also have to specify on most of them that they are left untrimmed so they leave all the the flanges intact from the deep drawing process. Otherwise they will cut that part off so the enclosure has finished edges.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules