FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Originally Posted by
EngineerGuY
I'd suggest the "Delorean Time Machine Builders" group on facebook. A lot of stuff being sold to other builders on there
Thanks - already there and asked as well but with no luck really. I do have a pair in my car now, I’ll have to look to see what make they are and then search around on the web. There’s a local surplus place and was able to score a few Simpson meters with the correct ribbed strip, but the round ones seem to be hard to come by. Anyone know what brand/model they are?
-
I'm always looking for spare parts if anyone is ever selling. Sadly didn't get to pull the trigger in time on Mark's orange tube, which was my own fault that I'm kicking myself for. But if anyone has anything they are looking to part with, shoot me a message. Thanks, hope everyone is having a good start to 2021.
-
Senior Member
-
Guy with a DeLorean
-
Senior Member
BTTF Time Machine Build Questions - Ask Me Anything
Interesting, especially the one with that extra piece behind it with the switches. From what I can gather, it’s really all about making it so the box basically can clear the side of the console- wrapping past it but at the same time aligning the front of it with the display unit.
-
Senior Member
This may have been asked before, but scrolling through this thread or even trying to do a search is an exercise in futility..
Time Circuit Display dimensions? The reason I ask is there seems to be TWO sizes - one that Gary Weaver had, and I’m thinking is used by Bruce as well as VideoBob - and a smaller/ less tall one that’s supposedly the A car size.
On the left is the Gary Weaver, on the right is supposed to be the A car size...
Both of these were made by Erick Codeville.
I have one of Bruce’s, however it’d be nice to be more accurate.
-
Guy with a DeLorean
The correct enclosures are Crown Royal Series 852 (CR852)
You can still buy them from LMB heeger. Dimensions are listed on the website.
https://lmbheeger.com/cr852-bluegrey.aspx
-
Senior Member
-
Guy with a DeLorean
That 3D model turned out nice. The drawings you were referencing were 2D views generated from a similar model I made myself. I measured real TRW keypad assy so all the dimensions are legit.
I posted a screen grab somewhere earlier in this thread but most of those have dead links
-
Senior Member
Thanks Mark!
I've actually made an electronics motherboard (basically) that attaches inside via posts - and has places to mount the LED's, button, speaker, circuit board, and the keypad assembly.
IMG_8196.jpgIMG_8197.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules