FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 48 of 48 FirstFirst ... 38 46 47 48
Results 471 to 477 of 477

Thread: BTTF Time Machine Build Questions - Ask Me Anything

  1. #471
    Junior Member
    Join Date:  Nov 2019

    Posts:    10

    Hi there, I donīt know if this was discussed before (try to use the search in this thread but found nothing)

    Does anyone know the measures of the TCD enclosure 6061 aluminium sheets? (both lateral and upper) I know that they used 3 LMB heeger boxes which makes the overall width about 216mm plus 6mm of the 2 6061 aluminium sheets.

    I would need the measurementes both in width and length (or length and height) of the lateral plates and the upper one (upper one would be something like "222mm x YYY mm")

    Thanks in advance!
    Last edited by Fabius_Uy; 01-27-2020 at 06:31 PM.

  2. #472
    Junior Member
    Join Date:  Nov 2019

    Posts:    10

    Hi me again, this time with an odd one.

    Does anyone know the tones used for the TCD FX? seems from the BTTF 1 movie that the digit inputs are just plain DTMF tones but BTTF2 and BTTF3 they sound slightly different. Also the time circuits on, input and error sounds seems that are not DTMF but some other tone.

    I do have some movie recordings for research but I want to make the sounds using tone generation

    If anyone can point me in the right direction it will be much appreciated

    Regards

  3. #473
    Member
    Join Date:  Mar 2016

    Posts:    66

    Quote Originally Posted by Fabius_Uy View Post
    Hi me again, this time with an odd one.

    Does anyone know the tones used for the TCD FX? seems from the BTTF 1 movie that the digit inputs are just plain DTMF tones but BTTF2 and BTTF3 they sound slightly different. Also the time circuits on, input and error sounds seems that are not DTMF but some other tone.

    I do have some movie recordings for research but I want to make the sounds using tone generation

    If anyone can point me in the right direction it will be much appreciated

    Regards

    If you can't find it here, head over to the Facebook group "Delorean Time Machine Builders Group". Anything and everything you need is there.

  4. #474
    Junior Member
    Join Date:  Nov 2019

    Posts:    10

    Quote Originally Posted by EngineerGuY View Post
    If you can't find it here, head over to the Facebook group "Delorean Time Machine Builders Group". Anything and everything you need is there.
    Thanks

  5. #475
    Member
    Join Date:  Mar 2016

    Posts:    66

    Hey Mark is there a wiring diagram anywhere? I know everyone has their cars built differently. But a basic diagram for having the time circuits, plutonium lights, flux, spectrum analyzer, roof console all synced together? I'll have to figure out the other stuff as I go but thought I'd start there.

  6. #476
    Junior Member
    Join Date:  Nov 2019

    Posts:    10

    Quote Originally Posted by Mark D View Post
    OK cool, that won't be a problem at all, I'll pull open the model file and snap a few dimensions for you.
    Hi Mark

    Im also looking for the readout displays measurements, but could not find the info posted.

    Can you shoot them over PM? or here?

    Best regards and thanks

  7. #477
    Guy with a DeLorean Mark D's Avatar
    Join Date:  May 2011

    Location:  Stevens Point,WI

    Posts:    2,151

    My VIN:    6125

    Quote Originally Posted by EngineerGuY View Post
    Hey Mark is there a wiring diagram anywhere? I know everyone has their cars built differently. But a basic diagram for having the time circuits, plutonium lights, flux, spectrum analyzer, roof console all synced together? I'll have to figure out the other stuff as I go but thought I'd start there.
    There isn't a wiring diagram that I'm aware of. When the boards for the A car were created (Flux capacitor, time circuits, plutonium gauges, speedo, etc) they were all designed to talk to one another but that is specific to those parts and it was all hand run wiring.

    Quote Originally Posted by Fabius_Uy View Post
    Hi Mark

    Im also looking for the readout displays measurements, but could not find the info posted.

    Can you shoot them over PM? or here?

    Best regards and thanks
    I have a drawing for the faceplate somewhere that I'll post here. There were half a dozen face plates created for the C car and they were all slightly different so what I created was an "ideal" version where all of the cutouts lined up at the top and bottom, and there were the consistent gaps between cutouts for each. In general they did a pretty good job making the face plates all match, but there were some small variations since they were all cut by hand.

Page 48 of 48 FirstFirst ... 38 46 47 48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •