FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 49 of 49 FirstFirst ... 39 47 48 49
Results 481 to 485 of 485

Thread: BTTF Time Machine Build Questions - Ask Me Anything

  1. #481
    Member
    Join Date:  Mar 2016

    Posts:    68

    Quote Originally Posted by Mike1830 View Post
    If you dont get one made from foam I have a 3D model of this that i found online and remixed to the correct size with measurements taken from an original.

    I also split the model into 4 sections and it goes together with aliglment pins and super glue.

    See attached pics of the 3d print.

    Sent from my SAMSUNG-SM-G930A using Tapatalk


    Wouldn't mind that 3D model Mike! I'll PM you.
    New Delorean Updates http://NewDelorean.com
    Rent a Delorean Time Machine http://DeloreanRental.com
    Back to the Future http://bttf.com

  2. #482
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,427

    My VIN:    Formerly 10372, currently 4728 & 4519

    Where does this go?

    Livin' the dream....

  3. #483
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,705

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Zero Can - Master List

    I tried searching this thread but go no results.

    Is there a master list of all the zero cans on or in the car?

    Thanks in advance for any help!

    Cheers
    Steve
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  4. #484
    Guy with a DeLorean Mark D's Avatar
    Join Date:  May 2011

    Location:  Stevens Point,WI

    Posts:    2,173

    My VIN:    6125

    Quote Originally Posted by mluder View Post
    I tried searching this thread but go no results.

    Is there a master list of all the zero cans on or in the car?

    Thanks in advance for any help!

    Cheers
    Steve
    VSR Can (Passenger Side Bulkhead) - 1 EA - Z61-163A-2.625 Untrimmed (Square 3.81W x 10.15L x 2.625H Untrimmed. Custom draw depth requires larger blank)
    Strain Relief Box SM (Bulkhead) - 1 EA - Z32-64A-2.5 Untrimmed (Square 2W x 4L x 2.5H Untrimmed)
    Strain Relief Box LG (Bulkhead) - 1 EA - Z48-80A-3.5 Untrimmed (Square 3W x 5L x 3.5H Untrimmed)
    PS Pontoon Boxes (PS Pontoon) - 2 EA - Z48-80A-3.5 Untrimmed (Square 3W x 5L x 3.5H Untrimmed)
    Heatsink Box (Rear Deck) - 1 EA - Z80-112A-5.0 Untrimmed (Square 5W x 7L x 5H Untrimmed)
    Shockmount (Inside Shockmount) -1 EA ZR35A-3.0 Untrimmed (Round 2.2OD x 3H Untrimmed w/ .27 Outer Corner Radius)
    Behind Reactor (Rear Deck) - 1 EA - ZR35A-3.0 Untrimmed (Round 2.2OD x 3H Untrimmed w/ .27 Outer Corner Radius)
    Trapezoid Cans (Rear Deck) - 2 EA - ZR75A-4.0 Untrimmed (Round 3.5OD x 4H Untrimmed w/ .27 Outer Corner Radius)
    Pacman Cans (Pacman Assy) - 3 EA - ZT68-68B-0.56 (Square Lid 4.25W x 4.25H Trimmed to .56 w/ .25" Outer Corner Radius)

    The large strain relief box and the pontoon side boxes start as the same part and are trimmed differently. The pontoon cans are mostly unmodified and you need to just trim up the 'ears' that are left over from the forming process. The strain relief box has the bottom cut to form the bent out side tabs that are drilled and mounted to the bulkhead. I don't have the exact measurements for trimming the parts, but there are some good photos of the pre-restored and post-restored car that show the boxes and how they are modified.

  5. #485
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,705

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by Mark D View Post
    VSR Can (Passenger Side Bulkhead) - 1 EA - Z61-163A-2.625 Untrimmed (Square 3.81W x 10.15L x 2.625H Untrimmed. Custom draw depth requires larger blank)
    Strain Relief Box SM (Bulkhead) - 1 EA - Z32-64A-2.5 Untrimmed (Square 2W x 4L x 2.5H Untrimmed)
    Strain Relief Box LG (Bulkhead) - 1 EA - Z48-80A-3.5 Untrimmed (Square 3W x 5L x 3.5H Untrimmed)
    PS Pontoon Boxes (PS Pontoon) - 2 EA - Z48-80A-3.5 Untrimmed (Square 3W x 5L x 3.5H Untrimmed)
    Heatsink Box (Rear Deck) - 1 EA - Z80-112A-5.0 Untrimmed (Square 5W x 7L x 5H Untrimmed)
    Shockmount (Inside Shockmount) -1 EA ZR35A-3.0 Untrimmed (Round 2.2OD x 3H Untrimmed w/ .27 Outer Corner Radius)
    Behind Reactor (Rear Deck) - 1 EA - ZR35A-3.0 Untrimmed (Round 2.2OD x 3H Untrimmed w/ .27 Outer Corner Radius)
    Trapezoid Cans (Rear Deck) - 2 EA - ZR75A-4.0 Untrimmed (Round 3.5OD x 4H Untrimmed w/ .27 Outer Corner Radius)
    Pacman Cans (Pacman Assy) - 3 EA - ZT68-68B-0.56 (Square Lid 4.25W x 4.25H Trimmed to .56 w/ .25" Outer Corner Radius)

    The large strain relief box and the pontoon side boxes start as the same part and are trimmed differently. The pontoon cans are mostly unmodified and you need to just trim up the 'ears' that are left over from the forming process. The strain relief box has the bottom cut to form the bent out side tabs that are drilled and mounted to the bulkhead. I don't have the exact measurements for trimming the parts, but there are some good photos of the pre-restored and post-restored car that show the boxes and how they are modified.
    Thanks, Mark.

    There's a restaurant going out of business and holding an online auction. Hoping I might get lucky and find some matches.

    Cheers
    Steve
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

Page 49 of 49 FirstFirst ... 39 47 48 49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •