Thanks Mark for your time.....you are always very helpful
Posts: 19
Thanks Mark for your time.....you are always very helpful
I don't know if this was already covered, but what's the height of the TCD keypad enclosure?
Posts: 19
Anyone have a good close-up picture of the original "A" car roentgen gauge ? ....seems like Simpson used two different fonts over the years.....
Thanks in advance
Mark,
Do you have any info on the Rowen Contactors and what the correct serial/part # is? I was told u can still buy them out there on ebay and such. When i search for 3 prong contractors I get a bunch but none that appear to be right
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Posts: 1
Hi Mark,
I just finished reading the thread and I wanted to thank you for taking your time to help the community. There is a ton of great information in here.
I'm in the beginning stages of building my own time circuits, and I'm having trouble locating alphanumeric displays that look the part. In the OUTATIME documentary there is a close-up shot of the reproduction time circuits at around 50:17. The alphanumeric displays in the reproduction circuits are 14-segment with no decimals and have all three digits close together in a single unit.
Do you know where these displays are from? Or do you have any advice for finding similar displays?
Thanks for the help!
Posts: 19
Hey Mark D......
.where are you ?
Still here. Post people have been sending me PM's if they have questions since this thread hasn't had much action and I'm not always checking for new posts.
Posts: 19
Thanks do you have any close-up pics of the A car Roentgen gauge .....I want to compare it to mine as I think I have an original.....
As always thanks for your time and knowledge....