FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Originally Posted by
Timebender
Thanks Steve- that should help on both questions. A question I forgot to ask was if you or anyone knows the dimensions or is there a pattern somewhere?
If I recall it's on Gary Weaver's CAD drawing that's floating around... It even has the whole spacing for the switches though I don't know if the locations have been confirmed as accurate.
Cheers
Steve
Cheers
Steven Maguire
#4456
IT'S A TRAP!!!!!
-
Senior Member
Originally Posted by
mluder
If I recall it's on Gary Weaver's CAD drawing that's floating around... It even has the whole spacing for the switches though I don't know if the locations have been confirmed as accurate.
Cheers
Steve
I have that actually, but aside from most of the things on there that make sense as to what they are, I can't figure out which would be the side plates or even front plate to the plutonium gauge panel.
-
BTTF Time Machine Build Questions - Ask Me Anything
Last edited by minispeedstar; 03-05-2017 at 03:19 PM.
-
Just leave me out of it..
"Dollar parasites"... That's one I haven't heard before.
Good one Mr. Anonymous.
-Gary
Originally Posted by
"What The Flux?"
I personally think that posts attempting to promote the business of (endorsing) the likes of dollar-parasites BC, GW and VB, should be deleted as unrelated to the topic.
-
Senior Member
Originally Posted by
minispeedstar
Steven's "Guru" Gary here.... lol
Here's one I'm finishing off from the parts mentioned by Steven...
Switch layout isn't technically screen accurate but a nicer even lay out in my opinion
I use the lid with vents for the TFC's I build with built in sound affects and have new lids made without vents for those without....
Here's a link to the perforated aluminium for the side panels of the plutonium gauges that I use....
https://www.ebay.co.uk/itm/301028135414
Nice work, other Gary!
-
Senior Member
Originally Posted by
Timebender
I have that actually, but aside from most of the things on there that make sense as to what they are, I can't figure out which would be the side plates or even front plate to the plutonium gauge panel.
OK... My mistake. I went and looked and the triangles aren't there... The front plate is there but the holes are not shown for the gauges... Just the overall size 15.5" x 5"
Cheers
Steve
Cheers
Steven Maguire
#4456
IT'S A TRAP!!!!!
-
BTTF Time Machine Build Questions - Ask Me Anything
These might help..
-
Senior Member
Originally Posted by
minispeedstar
Steven's "Guru" Gary here.... lol
Here's one I'm finishing off from the parts mentioned by Steven...
Switch layout isn't technically screen accurate but a nicer even lay out in my opinion
I use the lid with vents for the TFC's I build with built in sound affects and have new lids made without vents for those without....
Here's a link to the perforated aluminium for the side panels of the plutonium gauges that I use....
https://www.ebay.co.uk/itm/301028135414
Wow- That switch layout is exactly what I have been looking for.... One switch every inch! Can you tell me how you create the sound effects? Also, what is the proper size of the red and green jewel lights?
Thanks a million
Charlie
ps- It took me 3 attempts before I could bend the plexi properly!
-
Guy with a DeLorean
Originally Posted by
"What The Flux?"
Hi Mark,
Thank you very much for such an interesting and informative response. I love reading your kind responses to peoples questions and learning such incredible detail about the history of the parts. You really are of huge benefit to the community.
I completely understand about the sensitivity of some of this information, especially considering the intellectual property of others involved. I think it is very respectful of you to consider them before just simply publicising information.
No need to apologize at all! I am very grateful for the information that you have kindly shared with us.
Thanks again for your time.
Thanks for the kind words, I just try to help out wherever I can :-)
-
Originally Posted by
Mark D
Thanks for the kind words, I just try to help out wherever I can :-)
Yes, yes Mark D
You are very kind! I am very grateful too.
if you find the right scale for gauges (pic for printed) let us know, please
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules