slave.jpg
The part in the circle should move.
Location: Crystal Lake IL
Posts: 4,990
My VIN: 05429
slave.jpg
The part in the circle should move.
Location: Canada
Posts: 117
My VIN: 1983 canadian model
Be very careful when bleeding the clutch and check that no air went through. I had the same problem and finally resolve that by realizing there was a little bit of air in the shoulder at the junction of the line and the clutch slave cylinder. Just a tiny bubble will result at having no resistance on the pedal.
Location: Pompano Beach, Florida
Posts: 25
My VIN: 03246
Thanks so much, now I know what to look for or feel for. The photos are great.
Banzai
Sent from my iPad using Tapatalk
Posting Permissions
Reply With Quote