slave.jpg
The part in the circle should move.
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
slave.jpg
The part in the circle should move.
Dave S
DMC Midwest - retired but helping
Greenville SC
Location: Ontario, Canada
Posts: 217
My VIN: 1983 canadian model
Be very careful when bleeding the clutch and check that no air went through. I had the same problem and finally resolve that by realizing there was a little bit of air in the shoulder at the junction of the line and the clutch slave cylinder. Just a tiny bubble will result at having no resistance on the pedal.
Thanks so much, now I know what to look for or feel for. The photos are great.
Banzai
Sent from my iPad using Tapatalk