Hey guys first time posting here sorry if this is in the wrong place but does anyone know the size of the little screen used for the digital clock?
Hey guys first time posting here sorry if this is in the wrong place but does anyone know the size of the little screen used for the digital clock?
The digits or the whole glass tube? I believe the tube is 58x28.5mm or so.
Actually i need a diagonal like a digital screen
Location: Orlando, Florida
Posts: 2,734
My VIN: 01643
Club(s): (DCF) (DCO) (DCUK)
Oldest theorem in the book: A^2+ B^2= C^2
Based on Marios dimensions its 64.5mm.
Location: Taylors SC
Posts: 5,326
My VIN: (former)05429
Club(s): (DMWC) (DCUK)
Just knowing the diagonal does not allow one to know the dimensions of the hole.
Dave S
DMC Midwest - retired but helping
Greenville SC
Well i was hoping to at least fill the hole with a digital screen what would you suggest then?
It also depends how close to the surface of the "hole" you can mount your screen. Remember your looking at the screen at an angle in the drivers seat.
Dave M vin 03572
http://dm-eng.weebly.com/
hmm true i didn't even think about that, i saw a picture of a DeLorean clock replacement where you could play pong, so I am building my own using an AY-03-8500 chip
Dave M vin 03572
http://dm-eng.weebly.com/