FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Originally Posted by
Rich_NYS
Took a short ride today, but my battery light is on so I didn't want to go far.
Stopped to take a pic with a late 70's Plymouth Arrow near where I live:
Attachment 51668
Beauty Rich! Congrats! Really great to see you on the road!
If this marks the next chapter in the restoration of 4728, would you want to start a new thread/section on issues you're still getting resolved? I think this is about the 400th post here and there's lots of info. Might be easier for others to read a current list of issues than working backwards through this thread. Just a suggestion, up to you of course.
Sept. 81, auto, black interior
-
Originally Posted by
Jonathan
Beauty Rich! Congrats! Really great to see you on the road!
If this marks the next chapter in the restoration of 4728, would you want to start a new thread/section on issues you're still getting resolved? I think this is about the 400th post here and there's lots of info. Might be easier for others to read a current list of issues than working backwards through this thread. Just a suggestion, up to you of course.
Good point, I hadn't thought of that....I'll do that going forward.
-
Originally Posted by
Rich_NYS
Good point, I hadn't thought of that....I'll do that going forward.
(Hanging out on the Thug Forum is compromising my sense of etiquette -lol.)
-
Mostly Harmless...
Originally Posted by
Rich_NYS
(Hanging out on the Thug Forum is compromising my sense of etiquette -lol.)
Well, everyone's allowed a bad habit or two...
Your car's looking Great!
George
George.
1974 BMW RS90 motorcycle
1981 DeLorean. Cruise Control, Wings-A-Loft, Eibach springs, Spax shocks, Stage1 exhaust, Manual, Grey and Grooved, LED clock and fixed pulls.
1993 del Sol S (With a Few, Upgrades)
2017 Chrysler Pacifica Limited
-
I have my lambda counter out so I can reset it and diagnose my speedometer.
The counter rolled over while driving (at what I would've predicted to be 30K miles,) so I'm thinking I'm good from the wheel to the counter.
I can see the needle move when I spin the upper cable, so I'm thinking that's good.
But....my speedometer doesn't work.
Any thoughts?
-
the needle on your speedo moves when you spin the upper cable? does spinning the front wheel make the angle drive part spin?
-
Originally Posted by
Lwanmtr
the needle on your speedo moves when you spin the upper cable? does spinning the front wheel make the angle drive part spin?
yep...
-
Was it working fine before you pulled the counter?
-
Took my counter apart tonight & cleaned it a bit.
I spun the upper cable and the speedometer needle moves.
I spun the wheel and the lower cable moves.
I attached the lower cable & spun the wheel....the thing in the lambda counter moves.
I attached the upper cable & spun the wheel....the speedometer needle moves (albeit, somewhat jumpy.)
It was too late for test drive, but I think it'll work. I'm guessing that I didn't have the upper cable installed properly...
-
Could be some wear in the lambda or on the upper cable end that plugs into it. When I spun mine it didnt jump that I'm aware.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules