Cool. Thanks for the info.![]()
Cool. Thanks for the info.![]()
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)
Posts: 60
Location: Tacoma, Wa
Posts: 1,968
My VIN: 4877
Club(s): (PNDC)
Today I spent some time (prolly more than it shoulda took) putting in the new rubber links on the coolant pipe on the driver side. I might need to move one a little more to make sure I get a good seal. Was a pain to try and wiggle the front part and the hose to get it over the pipe...basically because i could only get one arm in there at a time..so I had to reach under the frame with one and the other up in there...and Im sure I used muscles in angles they really otta not be...lol
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Now Accepting Donations to get her back on the road
Location: Tacoma, Wa
Posts: 1,968
My VIN: 4877
Club(s): (PNDC)
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Now Accepting Donations to get her back on the road
Location: Tacoma, Wa
Posts: 1,968
My VIN: 4877
Club(s): (PNDC)
Today I started on the modifications to the front turn light wiring, adding in the connectors to plug the halos on my headlights. Used old style hard drive connectors since they have the same guage wire and are pretty durable.
Turnlights.jpg
Will have to do the ends on the lights themselves next, which will be a pain since i'll have to do it on the car.
Rob Depew
Tacoma, Wa
'81 DeLorean 4877 Grey, Auto, 4 wheels
The Ressurection of 4877......
Now Accepting Donations to get her back on the road